Fiat Doblo 1.9 Diesel Transponder

[DiagExpert]

Hello and merry christmas to all DK i have a customer that wants an additional transponder for a second key it's a Fiat Doblo 1.9 Diesel 2006 can anyone help me with info for this procedure.

Thanks.

[topclef]

this car require Transponder Megamos ID48 precoded , depending what tools you have ..

[DiagExpert]

i have tool to program it to the car but the transponder that i will use it's allready precoded or it must done it with Zedbull with the data of the car.

[topclef]

in this case , read dump BSI Delphi 93C66 or BSI Magneti marelli HC912DGxxx, and prepare transponder and match it using pin code .

[kemaster]

If you have Zed Bull , you can precode transponder and write it's ID by "Create Image File", back in dump for direct start.

[DiagExpert]

if i buy id48 transponder precoded for Fiat can be programmed to the car or i must prepare it anyway with Zedbull.

[p1et]

If you buy from dealer, it will come already precoded and then you can program the key with pin code

[kemaster]

Why bothering with dealers :). If BSI have been changed(I meet more and more such cars) it's waste of time and money. Just remove BSI, read dump and use Zed Bull to precode blank ID48. Then you can use Create Image File to start directly or add it by OBD programming using calculated PIN. :)

[p1et]

Of course but not everybody joying with that. I just gave answer to a question :)

[ninja123]

I do these by OBD in around 2 mins :)

All depends how serious you are with you tool buying budget.

ninja

[loid]

which tool do you use ninja and what other cars you do with the same tool?:hmmmm2:

[sparkz02]

AVDI

Key learning - by OBDII key programming for variuos models Fiat, Alfa, Lancia - Alfa 147 , Bravo, , Croma, Doblo, Ducato, Fiorino, Idea, Palio, Panda, Stilo; Lancia Thesis, Delta
BCM Read/Write EEPROM by OBDII. Supported units:
- BCM Delphi (93C66) -- NOTE: PIN Code is required!
- BCM Marelli (912DG128, 3K91D)
- BCM Marelli (9S12DG256, 1K79X)
- BCM Marelli (NEC 70F3237)
- BCM Siemens (9S12DG128)

[ninja123]

which tool do you use ninja and what other cars you do with the same tool?:hmmmm2:

AVDI original

ninja

[autochei]

also zedfull and cryptowork fiAT

[ninja123]

cryptoworks is a joke, no one should ever trust them again.

ninja

[loid]

does AVDI do other models either than the ones you just mansioned?

[totalkey]

does AVDI do other models either than the ones you just mansioned?
Avdi good for many fiat models