aveo dashboard 93c86

[pbn]

hello293498
please i have aveo 2012 dash 93c86 with 44187km
can someone please change 14187km
thank you
peter

[Johnner]

There's no mileage in there.Read from the BCM.

[pbn]

Thank you johnner
You are correct.
I dit it via obd by calibrating only bcm.
Thank you


Sent from my iPhone using Tapatalk

[zckariya70]

no milege is stored in bcm

[pbn]

hello zckariya70

there are 2 different dashboard for aveo and both with 93c86.

up to prodaction 2011, the file is the same as the spark.
with the milage stored on the dashboard on the first 10 lines of the dump.

on the 2012 and on, there is nothing stored in the dashboard.
it's only bcu, and can be done very easy with several tools via OBD as chevrolet cruze.

i hade to do 10 of them yesterday.

peter

[zckariya70]

yes u r right stored in bcm 24c16 in cruze i am doing with eeprom only it is very easy i did many cars and now also renault duster is came and stored in abs nt in bcm and fluence is also like that only can do easily i havent seen 93c86 in aveo i have did only 93c56 eeprom

[Tudor09]

hi, have 263335 and i need 186100401638 thanks

[rtbdiagnostic]

hello zckariya70

there are 2 different dashboard for aveo and both with 93c86.

up to prodaction 2011, the file is the same as the spark.
with the milage stored on the dashboard on the first 10 lines of the dump.

on the 2012 and on, there is nothing stored in the dashboard.
it's only bcu, and can be done very easy with several tools via OBD as chevrolet cruze.

i hade to do 10 of them yesterday.

peter
Hi Mates - would Digiprog 3 4.94 be able to do dash spark 2012 onwards with mileage stored in bcm via obd as chev cruze :chuncky:

[zckariya70]

No cannot do spark 93c86 by obd , but cruze can do by obd.........................

[PowerCheck]

Hello PBN with what programmer could you read the eeprom 93lc86?

[jomberykaso]

Hello PBN with what programmer could you read the eeprom 93lc86?


You can read a 93c86 with any eeprom programmer which has this eeprom listed...Upa 1.3 clone is good and cheap

[PowerCheck]

You can read a 93c86 with any eeprom programmer which has this eeprom listed...Upa 1.3 clone is good and cheapthank you jomberykaso. I do not understand xq when reading the eeprom with the programmer there is no data only FF FF. And when placing it in the dashboard it does not show the km and it lights two witnesses of which the car does not equip. Electric Steering and tire press monitor sensor.https://uploads.tapatalk-cdn.com/20190709/57c28c80eae51e9f0c0444f67c741697.jpg

Enviado desde mi LG-M700 mediante Tapatalk