Amiko Mini HD need 8 digits password

[super jumbe]

Got a box hear of my mate we just can not go in the config net asking 8 digits pin code, any idea? Tried all zeros etc, please help.

[joe516]

Got a box hear of my mate we just can not go in the config net asking 8 digits pin code, any idea? Tried all zeros etc, please help.

9999 or 6666?

[joe516]

Got a box hear of my mate we just can not go in the config net asking 8 digits pin code, any idea? Tried all zeros etc, please help.

00110022..................

[super jumbe]

00110022..................

Tried 00110022 wrong pass, any way can I delete the lot and install from fresh?
Thanks in advance.

[vorlon2257]

Try updating the firmware it should wipe all passwords if you haven't done so already

[super jumbe]

Try updating the firmware it should wipe all passwords if you haven't done so already

Updated via USB still the same, mates I have come to the end of the road, appreciate any other solution.

[vorlon2257]

What firmware version did you update to?, here's where I get my firmwares from....h**p://amiko.ucoz.com/index/amiko_mini_hd_combo/0-8.

[super jumbe]

What firmware version did you update to?, here's where I get my firmwares from....h**p://amiko.ucoz.com/index/amiko_mini_hd_combo/0-8.

Thanks mate I will let you know tomorrow.

[vorlon2257]

Just ignore the advert popups once you click on the download link, also the more I think about it the 8 digit code it's asking for sounds like a birthday date.... 00 00 0000 .

[super jumbe]

Just ignore the advert popups once you click on the download link, also the more I think about it the 8 digit code it's asking for sounds like a birthday date.... 00 00 0000 .

Looks like terminator birthday, mine is Amiko Mini HD and not combo HD, you got another link to mini HD firmware?

[vorlon2257]

Yes mate, on the left there are links to all the other amiko box's think yours there as well.

[super jumbe]

Yes mate, on the left there are links to all the other amiko box's think yours there as well.

Thanks mate with your help got sorted.

[vorlon2257]

Thanks mate with your help got sorted.

Excellent news mate, glad to be of help

[damiensk]

i have a amiko mini hd to sort, it says on the box info lastest update oct 2012, loader version m3606f 1,1,3
s/w version 0a070a00_1.4.87 emu.

whats my best bet going forward?

thanks for any help

[vorlon2257]

If it's an original amiko (are ther cloneboxs ?) then the link I provided for the firmware's will allow you to update it to the latest firmware, the reason I'm asking if it's an original amiko is that firmware info you provided is not listed on the amiko mini hd firmware page and I think they go back to when the box it was released.

But where it says loader version m3606f 1,1,3 in your info, there is a upgrade tool for that loader (3606) listed on that page in the tools for amiko section. So it could be that yours is an original amiko.

[damiensk]

thanks for your help vorlon,
have now updated to what i believe is the latest version january 2015, 0a07oa00_1.6.54 emu.
couldnt see anything about a loader version on the site?

another thing is all my sly bouquets have now gone, do you know where i can d/l a file?

thanks again

[vorlon2257]

No mate can't help you there, only thing I can think off is to do a search on google to see if there are any on there.

[damiensk]

thanks anyway. will do a search

[mini]

I also have issue with the Amiko mini combo, unable to get past the password.
what firmware do i need as well as the upgrade tool. Also is it a 3.55mm (3 pole)jack needed?
I prefer dreamboxes, this is a favour for a friend.
All help is much appreciated, thank you

[mini]

Managed to sort it. Got loader from amiko and firmware from amiko website.
then as I didn't have a rs232 to 3.5mm cable, I had to solder the wires direct on to the female jack on the board and it worked.
If anyone has to do same then the wires to solder are: the tip is TX then Ground, RX and then ground.
If anyone needs to make or order a cable then you will need rs232 and a 3.5mm (4 pole) jack.

[ruk4]

hi
PLZ CAN SOMEONE HELP ME OUT :dontknow:
I HAVE AMIKO HD 8150.....
1] I NEED A SOFTWARE TO UPGRADE BY USB
2]CONDITIONAL ACCESS I CAN GET IN NET CLIENT CONFIG EACH TIME I TRY ITS ASKING FOR IN PUT PASSWORD --------
PLZ HELP ME THIS IS NEW TO ME
THANKS:)

[P&D]

Everything you need is here.....http://amikoreceiver.com/amiko-hd8150/

P.s........turn your caps off........

[ruk4]

Thankyou
Sorry to trouble you but don't know what link to download. ....
Can you tell me which link do I downloaded and would that remove the password from net Client config.

Thanks☺