RWPROG RF / HiTag

[ray-ray]

Who has these tool ? Who can share ?
tool work just like the tango but with Internet connection only. Tool is low cost and the module are free. Here is how to unlock your chrysler FCC: KOB
https://m.youtube.com/watch?v=NEbBKWPePJQ&list=PLE535DC5D61326B23&params=OAFIAVgC&mode=NORMAL

[autofan1965]

Where you see on video that he unlock key?

[ray-ray]

Sample was shown on the video.

[Bishop c4]

the unlock process involves more than that it's not enough to be able to write such pages so...... not posible

[ray-ray]

I use PAMS DEVICE to unlock FCC:OTH AND M3N via dump to the chip on board. 4 wires are needed to reset from lock mode, + & - data in & out. The legs on the chip are 10 & 11 . For KOB I use RWPROG & unlock via RF. So if you know what your talking about, share how you get it done.

[Bishop c4]

well are you talking about the RW or the MK? two differnet animals for sure
but anyways as I said not enough to modify such pages

BTW I'm not trying to probe nothing just saying not posible just doing what the video shows

P.S. the mk you are talking about seems to be the copy of another tool that actually has support and more functionality take a look
https://www.youtube.com/watch?v=98aa3Haq13w

[ray-ray]

I have them both and use them both as I unlock chips on the side. So MK is out Russia not sold in the USA, till 8 month ago ikeyclone got usa distributor. I bough my 2 yrs. ago sold out of Mexico. Rwprog does unlock chip if you know how to change the pages. Rwprog does more then just unlock its a zed-bull or tango but needs to be connected to the net.

[Bishop c4]

ok then...... I think first problem to solve with RW is to manage to have the reading from the KOB pcb, (when it's locked) what do you think?

[ray-ray]

Read and learn
http://www.bicotech.com/rwprog_files/files/doc/help_en.pdf

[autofan1965]

There is everything explained like usual and for any changes you need know password first. Can you explain us from where you get correct password for used key?

[Bishop c4]

Read and learn
http://www.bicotech.com/rwprog_files/files/doc/help_en.pdf
oh....... boy

[Po lock]

I bit the bullet and actually got 2 rwprog's. One for me and one for a friend. Can anyone tell me if it writes CN chips? As my friend does not have a cn900. I am out of town and haven't had a chance to test it out, so I can't totally vouch for its abilities, but Don't let the fact you have to WU dollars scare you off from getting the rwprog. After wiring the dollars I got a EMS tracking with in 3 days and it arrived in the US in 4 days.

[ray-ray]

Cn1=4c tested with rwprog. Works!
saab cim tested (read dump, save , write key, car starts.)

[Po lock]

Nice. Thanks. I still haven't got around to mess with the rwprog. Holmes has a zillion things going on. But my buddy has tinkered around with it. Think it's a bit advanced for him and I. He's bummed it won't do 4D chips. But he doesn't do EPROM work so he can't appreciate its other functions. The tech support for the rwprog is pretty good. He got an answer to his question with in a few hours. Hell I'd be ok with 24hr wait. Cn900 is my advice to him for his other cloning needs.

Still ain't hit that Saab. Dude had it parked behind a fence with 2 pit bulls. After my 10th time stepping in dog poop I asked him to get the car moved and call me when it's been done.

[centrohifi]

where to buy RwProg ?
the site is closed !!!
You have software ??
ThK