PDA

View Full Version : Hyundai Terracan 2.9 immo file.



Positron2200
12th January, 2015, 06:54 PM
Hi Dears.
I have a Hyundai Terracan 2004, 2.9 Diesel, ECU with out DTCs stored in memory, but do not accelerate normally. The engine RPMs are hold only in 2500 RPM aprox and check engine ligth allways ON. I need know if is it a simptom of immo activated or is some calibration problemm.

I f some body have a bdm full file and instructions pictures for this ecu , becouse the ECU was opened before and i'm not sure have the correct dump. I wil be grateful.

Best Regards.

CLK1201
13th January, 2015, 05:35 AM
Dont have INJECTOR QR code in ECU .

Positron2200
13th January, 2015, 06:19 AM
Dear, You mean that have not programmed the inyector codes?. Is possible do this programming direct in the dump?


Thanks.

CLK1201
13th January, 2015, 06:42 AM
i read by magpro2

Positron2200
13th January, 2015, 02:46 PM
Dear, Where you get this. From eprom or from flash?

CLK1201
13th January, 2015, 03:49 PM
i dont know this file in eprom or flash but this file for 4injectors QR code read by MAGPRO2

Positron2200
12th February, 2015, 06:26 PM
Dears I still have this problemm. Can some body programm the inyectors codes to my dump?