simaservis1108
15th January, 2015, 07:03 PM
Hello guys,
I have the following car,came in as a non starter.
In ECU are next DTC's:
P1354 - Intermittent - CKP and CMP synchro
P1622 - Current and stored - Y75 Valve fault wiring
In EIS there are no DTC.
Car cranks but not starting.
What the owner has done is:
Car was running,and the he pulled 2 ECU connectors out.Positions of connectors are to the right side of the ECU when looking at the front.Car shutdown instantly,and doesn't start anymore.
ECU is Bosch CR1.1
Anyone have any suggestions what to try?
I have measured the valve and it is OK,fuel flows through it.
CKP and CMP sensors both OK.
Regards
Sima
I have the following car,came in as a non starter.
In ECU are next DTC's:
P1354 - Intermittent - CKP and CMP synchro
P1622 - Current and stored - Y75 Valve fault wiring
In EIS there are no DTC.
Car cranks but not starting.
What the owner has done is:
Car was running,and the he pulled 2 ECU connectors out.Positions of connectors are to the right side of the ECU when looking at the front.Car shutdown instantly,and doesn't start anymore.
ECU is Bosch CR1.1
Anyone have any suggestions what to try?
I have measured the valve and it is OK,fuel flows through it.
CKP and CMP sensors both OK.
Regards
Sima