mercedes sprinter w906 DPF OFF help

[JIMMYQ]

hi guys I have a ecu here from a w906 sprinter I need to remove the DPF which chip should I be reading ?

A6461506472
ED6107
SW24.07
HW31.06
0281015054

DPF IN THE FLASH ie am29400

not opened the ecu just yet

[insomnia2009]

hi jimmy are using galletto to read ecu true pins will do on kline is enough to dpf off this ecu is a nightamre to open i would go true pins here is a link

https://www.google.ie/search?q=edc16cp31+pinout&espv=2&biw=1024&bih=667&tbm=isch&imgil=nSxfsI765o6r6M%253A%253B5QxVObworDGhLM%253Bh ttp%25253A%25252F%25252Fwww.transpondery.com%25252 Fpinout_guides%25252Fmercedes-edc16cp31-edc16cp32-pinout.html&source=iu&pf=m&fir=nSxfsI765o6r6M%253A%252C5QxVObworDGhLM%252C_&usg=__bPpeKwfYYLxgSFfgEogoyAJcIrg%3D&ved=0CDEQyjc&ei=Y2K4VOzDFsavUZvtgEA#imgdii=_&imgrc=nSxfsI765o6r6M%253A%3B5QxVObworDGhLM%3Bhttp% 253A%252F%252Fwww.transpondery.com%252Fimages%252F MERCEDES-EDC16CP31-PINOUT.jpg%3Bhttp%253A%252F%252Fwww.transpondery.c om%252Fpinout_guides%252Fmercedes-edc16cp31-edc16cp32-pinout.html%3B654%3B185

[twincam]

Do not open this ecu ,it has BDM pads on the other side of PCB ,it will be destroyed after full opening ,safe way is to cut a hole in the housing of ECU.

[insomnia2009]

i have opened many successfully but i damaged a few trying to get the right way of doing them its your first jimmy do the dpf true kline

[JIMMYQ]

can I do with obd? galletto v54?

[sepistar]

yes.i have read,write succesfull with v54 w906 through obd.
egr and dpf.
br.

[JIMMYQ]

attatched is the file for this ecu if someone can kindly check and remove the DPF 100% please

[16eddi67]

try and report,pass PM.
disconnect connector from temperatur sensof and sensor diff.pressure :elefant:
Best regards Eddy

[JIMMYQ]

try and report,pass PM.
disconnect connector from temperatur sensof and sensor diff.pressure :elefant:
Best regards Eddy

disconnected both sensors started car no problem worked great mate no faults thanks much appreciated :)