PDA

View Full Version : kess V2 db25 pinout



fronzethenight
16th January, 2015, 10:17 AM
Hi, i need to know where boot and cnf1 wires connect in db25 main unit... I have original kessV2 and i need unlock a pcr2.1 but i don't have tricore dongle...
I need help please

Thanks

ominimicu
16th January, 2015, 11:30 AM
i tested with the meter...and has no conection to the db25...

fronzethenight
16th January, 2015, 11:37 AM
Anyone can measure with multimeter, continuity between the end of the boot and cnf1 wires and db25 tricore dongle... Are 2 minutes, please!
Thanks

fronzethenight
16th January, 2015, 11:39 AM
i tested with the meter...and has no conection to the db25...
You have original or clone dongle?
Thanks

fronzethenight
16th January, 2015, 11:43 AM
Certainly boot wire must be ground signal... But cnf1 i don't know...

fronzethenight
16th January, 2015, 03:17 PM
Anyone have any idea?

Thanks

prusony
17th January, 2015, 01:08 AM
Anyone can measure with multimeter, continuity between the end of the boot and cnf1 wires and db25 tricore dongle... Are 2 minutes, please!
Thanks

CNF1 (BLUE CROCODILE) ---- 04/DB15M ---- TRICORE-BOX ---- inside box is not just a wire, but collector SMD transistor 5B, and next into the scheme ....