senic 1999 immo problem( urgent)

[correia]

hello everyone need help immo took a scenic 1999 1.9dti 0281010077 with immo kiler replaces 24C02 24c04 raised by pin 7 pin 8 ligeiao cut green wire 59 and ocarro works fine the first time 6 sec flashes aluz the candles off the key not already works and modifies the file in 24c04 already happened someone?


tanks295282

[correia]

if someone can help me thank you

[OFFIMO]

put central image I have worked file .... 10000%

[correia]

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=295297&stc=1http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=295298&stc=1http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=295299&stc=1 0281010077

[OFFIMO]

295308 off ... ok ok post results cut pino 59

[correia]

not resulted light flashes resistance as soon as the ignition is turned and does not work


tanks

[BoNzOtM]

you need to write protected with upa....

[OFFIMO]

hello friend must have another defect because the file works ok ok no need to protect the memory only engrave and cut the pin 59

[BoNzOtM]

2 weeks ago i have a msa15.5 and i have writted with xprog and start once and after did not start untill you rewrite the eeprom...you need to protect writing with upa or othew programming tool and lift 7 to 8 and cut pin 59

[Shmortz]

the easy way is to replace eeprom and make it write protect, but this is not good solution, the best is to fit emulator...

[OFFIMO]

replace the memory by another and writes the file I sent, already used the file need not protect

[ammarben]

take off 24c02 the car will start

[Meat-Head]

Write ff in EEPROM then the off dump incase EPROM 'dirty'

[metercar]

This found many times on this jourassik cars, but...you will need to extract Glow lamp and save it to your "box lamps" :top: