Log in

View Full Version : EEPROM location Honda bike 38770-MCW-D03 please help



zbyszkok
17th January, 2015, 06:49 PM
Hi friend

Can someone please help me locating the Immo location of this honda bike VFR800.

gokey
21st January, 2015, 08:33 PM
you have picture ?

zbyszkok
22nd January, 2015, 08:41 AM
Yes, I think EEPROM is located around red mark but Im not sure.

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=295861&stc=1http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=295862&stc=1

On the last picture X-ray of the selected site (red).

zbyszkok
22nd January, 2015, 08:48 AM
Yes, I think EEPROM is located around red mark but Im not sure.

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=295861&stc=1

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=295865&stc=1

On the last picture X-ray of the selected site (red).

gokey
22nd January, 2015, 08:55 AM
...picture....

zbyszkok
23rd January, 2015, 12:48 PM
On this location i have chip marked as:

2028
J3L3
62AC


not 93Cxx, please help

sv2hqx
23rd January, 2015, 01:50 PM
location from gokey is correct
eprom l46
93lc46

Bllinda
23rd January, 2015, 03:07 PM
what chip manufacturer?
It may be written in [L46R].

On this location i have chip marked as:

2028
J3L3
62AC


please help

flyins
23rd January, 2015, 08:18 PM
What year is bike? Is it vfr800x? vfr800f?
I have 2014 honda kiehin ecu with no eprom, sorry to bump thread just wanted to know year as i have completely cut open a 2014 plate honda and it has no eprom!!

gwee
23rd January, 2015, 10:48 PM
location from gokey is correct
eprom l46
93lc46

it will be nice if you can thank those who helped you :)

zbyszkok
24th January, 2015, 10:42 AM
This bike is vfr800v-tec 2003 year.

sv2hqx
24th January, 2015, 05:29 PM
This bike is vfr800v-tec 2003 year.

ok
as gokey say and like in photo eprom on the left
93l46
the eprom in the midle for ecu is data for fault codes
as in picture

ninja123
4th February, 2015, 09:23 PM
I need to replace lost key on 2006 lexus IS220 diesel, Ive never worked on this car before, can anyone explain process? I have full AVDI but manual is poor :(

Also, anywhere that sell this key or only from dealers?

Thanks for any info, regards ninja

viw9419
5th February, 2015, 11:06 PM
. . . . . .

viw9419
5th February, 2015, 11:07 PM
. . . . . .

ninja123
6th February, 2015, 08:19 AM
where can i get a transponder with page1=98? I cant seem to generate one either.

Managed to get a used remote but page 1 is D4??

I have heard that AVDI can do by obd, we will see!!

ninja

gwee
6th February, 2015, 09:32 PM
where can i get a transponder with page1=98? I cant seem to generate one either.

Managed to get a used remote but page 1 is D4??

I have heard that AVDI can do by obd, we will see!!

ninja

your car is not 98 is 94, 98 only for 2009 and above

post smart dump, will give you 4 pages to start car

viw9419
6th February, 2015, 10:30 PM
. . . . . .

mcgywer
11th March, 2015, 06:53 PM
Hi,
i try to find eeprom in that type of ECU - eeprom found but two resistors take off from board - marked on picture.


Does anyone have picture of that eeprom?

Thanks in advanced
Mat

lion0304
12th March, 2015, 04:21 AM
Your components are reversed place.
Cxxx is Capacitor, Rxxx is resistor.

mcgywer
12th March, 2015, 10:42 AM
Do you have picture of this?

lion0304
12th March, 2015, 11:48 AM
SOrry, i have no. On your picture you solde wrong place the resistor and capacitor. Need reverse them. I'm electronican.

mcgywer
12th March, 2015, 03:03 PM
Problem solved.

I generate key with Advanced Code EVo and motorcycle starts fine.

Problem was key which i generate with Abritus tak key tool.

Here's picture with correct place of resistor

Regards

serdar55
15th March, 2015, 04:04 PM
2006 60RR HONDA

zbyszkok
17th April, 2015, 12:39 AM
Hi, found EEPROM is highlighted on the picture.
This is a 93c46, after reprogramming all its OK.

Thanks.

PS: mcgywer & mat : if you still want to give these values i can send this tomorrow.

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=309725&stc=1

lunchb0x
20th August, 2016, 04:10 AM
Anyone have a .BIN file for this ECU as I would like to compare it against one that I have.

Thanks.