PDA

View Full Version : Renault Megane 1.9DCI non start



Tawe
19th January, 2015, 05:10 PM
Hi. I have problem with 2003 Renault Megane II with Bosch EDC16C3 (0 281 011 275) ecu.

Car won't start, and I find out that have problem in ecu hardware. I fixed that and car starts. It worked for about 5mins and I turned off. After a while, when I wanted to start again it surprised me with non start.

I checked for faults and there was: DF038 and DF025.

I tried to make virgin eeprom 95160 with IUD v3.2 and put back in ecu, car still won't start.
Also tried to code injectors without succesfull.

Solution ?

Tawe
19th January, 2015, 07:58 PM
If I buy used ecu with same numbers, I need to swap only eeprom ?

Meat-Head
19th January, 2015, 08:04 PM
Yeah but copy it first

Tawe
20th January, 2015, 09:27 PM
Which ecu numbers can be replaced with this original ecu to fit in car ?

0 281 011 275 ?

Tawe
25th January, 2015, 12:20 PM
I started car. Buyed used ecu, programmed and works!

kohli
10th June, 2015, 05:59 PM
DO YOU WANT IMMO OFF I CAN HELP YOU

willow2u
6th May, 2016, 07:53 PM
is it possible immo of or virginise file here is dump cheers374025

Meat-Head
6th May, 2016, 10:49 PM
is it possible immo of or virginise file here is dump cheers374025

Stick it in your boat with twin peogoet hdi engines, & ditch the lot at sea

willow2u
7th May, 2016, 09:24 AM
thats probably the truest thing you have said at some point in this swap i wish i had

messhi788
7th May, 2016, 08:49 PM
syncronise ecu and uch ferst :chuncky: