Log in

View Full Version : Citroen Berlingo HDI EDC15C2 immo off


Shmortz
24th January, 2015, 02:54 PM
Hi guys, I need immo off tested solution for EDC15C2 ECU with 1 plug 0281010360
...tryed all known solution in eeprom and some in flash but no success, help please...
KILL_THE_IMMO
24th January, 2015, 04:17 PM
TRY TO PROGRAM EPROM ONLY WITH IUD LAST TIME WORKED FOR ME
Shmortz
24th January, 2015, 05:30 PM
not working, P1517 DTC is still active and engine don't start
pagautas
24th January, 2015, 07:04 PM
try and report
296343
Shmortz
25th January, 2015, 11:13 AM
I will try and report tomorrow
Shmortz
26th January, 2015, 05:57 PM
not working, I tryed also dump with simular modifications, no sucess...
please help with tested solution...
gyapi11
26th January, 2015, 07:02 PM
Hi. Try it
sl4ck
26th January, 2015, 10:52 PM
Are you sure problem is IMMO?
pagautas dump should work..
Meat-Head
26th January, 2015, 10:55 PM
Weird should do run run do run run.

what was orginal fault code? Check the right hand side front coil spring! Had non start because of broken spring
cfgebel
26th January, 2015, 11:49 PM
Hi guys, I need immo off tested solution for EDC15C2 ECU with 1 plug 0281010360
...tryed all known solution in eeprom and some in flash but no success, help please...

..........................................PS IN PM

BELKACEM
Meat-Head
27th January, 2015, 12:00 AM
PS IN PM

WHY WOULD YOU PASSWORD AN IMMO OFF FILE FOR ONE ONE OF THESE.

Like going to Walmart to find the shopping carts all need a password, you just think stupid dump asses
dell66
27th January, 2015, 01:02 AM
remove chip
Shmortz
27th January, 2015, 08:10 AM
Hi. Try it

tested, not working


Are you sure problem is IMMO?
pagautas dump should work..

this mod worked for picasso, here don't work


Weird should do run run do run run.

what was orginal fault code? Check the right hand side front coil spring! Had non start because of broken spring

original fault code is P1517 - imobiliser fault


..........................................PS IN PM

BELKACEM

I will test and report!

Is there need to change something in eeprom?
pins 36 and 66 are cut, that's right?
Meat-Head
27th January, 2015, 09:01 AM
Once you edit EEPROM with ny04 4 bytes you have forever P1517 but mil goes out.

did have one with bad fuse box
drewdom
27th January, 2015, 10:09 AM
Im not sure but some time ago I had the same car with P1517 reason of this code was fuel pressure problem.Pump unit or injectors need to be check.B.R

send from my Hummer H1 phone using taptalk
ANIS AKARI
9th February, 2017, 01:34 PM
remove chip 5P08 OK