View Full Version : Grand Cherokee 1998 remote programming
p1et
26th January, 2015, 07:37 PM
Is it possible to program such remote or dealer only? MVP doing very nice JEEP remotes but from 1999. I though for this one now will be manual procedure but I cannot find any and the only answer on the web I found was the dealer. Any clues?
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=296612&stc=1
camelgd
27th January, 2015, 02:37 AM
Check out this website- they have instructions for some, didn't have time to research it myself-http://www.cheapfobs.com/blog/key-programming/gm-mazda-ford/
obdsystems
27th January, 2015, 03:17 AM
Believe this to be a american imported to European/UK and retrofitted with "may & scofield "remote central locking/alarm system.
Do a google on that - you may be lucky. These are shite systems with little docs or support. Last car we took down the scrap yard - best place for it -
Mind you a later '01 Grand Cherokee was crap also. No match to our UK Landrover
PS. If there diesel then do immo off
fadhle
27th January, 2015, 11:51 AM
you can program this remote by t300 with a good adapter either 138 or 139, regards.
looksharp
30th July, 2016, 02:37 AM
Hello!
I have the same problem. The jeep came only whit one remote, and I need another one just in case...
I bought a sbb key programmer programmer (replica, from ebay) but no luck. just says ecu not found...
Did you solve the problem p1et??
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.