PDA

View Full Version : 2000 Ducato add key data to immo



stoyanov
27th January, 2015, 10:25 AM
Hi guys,can somebody add key data to immo file,it's yellow immobox with 93c46 inside.
Attached dump from immobox,key data is FF 81 34 78 F7 1B 8D 61 ,transponder megamos ID13.

Regards

topclef
27th January, 2015, 11:16 AM
Write this key data on transponder ID13
Key1 : FF81 3434 9914 8B04
Key2 : FF81 3434 AAB4 9F62

stoyanov
27th January, 2015, 11:35 AM
Thanks but if possible I want to write key data in memory dump.Key was readed with TMpro and I need only to add it in dump.I think it's not worth it to buy TMpro module for this old car.

topclef
27th January, 2015, 12:18 PM
no need to buy , use any read/write transponders programmer RW2-4 to write ...

amper
27th January, 2015, 06:42 PM
FF 81 34 78 F7 1B 8D 61 = DB 86 66 17

stoyanov
27th January, 2015, 07:27 PM
Thank you,for now I have write one of key data posted from topclef (http://www.digital-kaos.co.uk/forums/member.php/143070-topclef) on T5 chip and I'm wait for feedback.The car is not with me and if I will post the result later.Thank you again for your time!

Bllinda
29th January, 2015, 11:52 AM
This key is already on, okay. Could immo not work.

FF 81 34 78 F7 1B 8D 61 = DB 86 66 17

stoyanov
29th January, 2015, 08:13 PM
Till now no feedback from owner of this car but I think this mean all is fine.It's my fault I didn't say that there are all keys lost and need to make key to start the car.I would like to know how do you calculate key data to eeprom data,if it's not a secret or maybe on PM.

Meat-Head
29th January, 2015, 08:37 PM
would like to know how do you calculate key data to eeprom data,if it's not a secret or maybe on PM.

Wicjed yes please, right do some stalking member jimmyq avataur of toilet, he had a thread THINK just called punto. In that thread is a 'calculator' for this, but I never figer it out.

rumir stares keys in lines 3,4,5 ????

autocargo
4th May, 2015, 02:36 PM
Hello. Got same problem here... Ducato yellow immo box, all keys lost. Used Effi software wrote succesfully on ID13 T5 transponder, car still not starting... Could somebody give me key logic from my dump? Could I erase/write again the same transponder with new key logic from my dump? Thanks in advance for helping. Here is my dump.

kemaster
4th May, 2015, 02:57 PM
Hi. Try: FF 81 34 74 CB 58 12 20

Yes, you can erase/rewrite your T5 transponder

dyzio
4th May, 2015, 03:15 PM
or try with this
FF 81 34 74 AB 92 BA 77

autocargo
4th May, 2015, 03:24 PM
Hi. Try: FF 81 34 74 CB 58 12 20

Yes, you can erase/rewrite your T5 transponder

Thank you. Tomorrow will let you know if OK.

autocargo
4th May, 2015, 03:31 PM
or try with this
FF 81 34 74 AB 92 BA 77
Thank you. Is this second key? What software will show me key logic? Thanks.

dyzio
4th May, 2015, 03:32 PM
It's from miraclone

Bllinda
4th May, 2015, 08:43 PM
Maybe starting at: xx xx DC xx xx....


or try with this
FF 81 34 74 AB 92 BA 77

Meat-Head
8th May, 2015, 07:34 AM
There was a vergin dump file somewhere, the first two lines saved rest FF when sees first key, master. Then two slaves