PDA

View Full Version : checksum please on Kia dcm 3.7



moky
28th January, 2015, 06:21 PM
hi


someone can verify checksum and file please on this dcm 3.7? (kia pro ceeds 90hp)

error after read from kess: checksum error

Guy say me car is not tuned..

HW: U700B120_DELIV_1
SW: 7G65_UBAA02_D2 U
N?.VIN:
Ver.SW: UBM02EI5UC
Ver.HW: U7G65
SW m?j.: 65UB502MCWEHIA02

if someone have original ..

many thanks !!

brahimdiag
30th January, 2015, 12:56 PM
:chuncky::chuncky: try the is 297221

moky
30th January, 2015, 02:59 PM
thanks but checksum is from 2014 !

chiptuningmaha
30th January, 2015, 04:26 PM
what tools use to read this file ?

moky
30th January, 2015, 06:15 PM
Kess was use but checksum error in end of reading..

chiptuningmaha
30th January, 2015, 07:36 PM
so, if you have checksum error in end of reading... this means that software on ecu is already modified.
I had the same problem in Opel Insygnia 2.8 T OPC... and there was mod.

moky
30th January, 2015, 07:49 PM
car have 2000km and sure no mod ...perhaps too much recent car..

chiptuningmaha
30th January, 2015, 07:52 PM
give all numbers from ecu

moky
30th January, 2015, 07:53 PM
HW: U700B120_DELIV_1
SW: 7G65_UBAA02_D2 U
N?.VIN:
Ver.SW: UBM02EI5UC
Ver.HW: U7G65
SW m?j.: 65UB502MCWEHIA02

chiptuningmaha
30th January, 2015, 08:50 PM
it is 100 % oryginal. I compare with oryginals from Kia Rio 1.4 CRDI 90HP. But my file have 2mb (read by CMD) Your file have 2.125 - read by Kess. All maps is the same.
ECM Titanium find in your file driver. So all is ok.

moky
30th January, 2015, 09:18 PM
ok thanks a lot so hardware problem..

moky
30th January, 2015, 09:20 PM
please send me your original file

thx!

chiptuningmaha
30th January, 2015, 09:37 PM
297307

pass PM

moky
30th January, 2015, 09:50 PM
many thanks !

caliskan71
1st December, 2016, 04:53 PM
hello


I have hyundai i20,readed by kess and it give checksum error after read
need dpf off if my file is ok,I m ready for pay.thanks

HW: U700B120_DELIV_1
SW: 7G65_PBAA02_D2 P
VIN nr.:
SW ver.: PBMH0EI5UC
Spare:
Engine:
HW Ver.: U7G65
SW upg.: 65PB502MCWEHIA01
Installation:

jecdu33
17th September, 2019, 12:10 AM
Hello.
I have error after read from kess: checksum error.
you write without problem?


i have this ID
HW: U700B120_DELIV_1
SW: 7H63_PBAA01_D3 P
VIN nr.:
SW ver.: PBMH0EI5UC
Spare:
Engine:
Ver. HW: U7H63
SW upg.: 63PB5H0MCSEHIA01
System:

alclot
30th September, 2019, 08:03 AM
Hi mates,
Can anyone help me with checksum for this dump please?
39130-2A500 hyundai i20 1.4 CRDI
Thanks in advance ;)

reproteq
2nd March, 2020, 06:55 PM
i have same problem cks error
i20 dcm 37p

can calc cks ?
thanks in advance