PDA

View Full Version : Navi Nissan Pathfinder garbage screen



TR0UBLESH00TER
30th January, 2015, 08:28 AM
Screen shows "Nissan" for a fraction of a second at start then only randomly stripes and dots .Radio still works .
First guess was faulty screen ,but that was all wrong ,bought one from ebay and the problem remain.
Checked signals out from navi with scope ,looks good except YS wich is a steady 4.8 V (?) ,instead of rectangular signal.
Have nt checked yet the signals at screen plug ,will do at next attempt ,maybe a faulty cable from navi to screen ?
Customer says that from time to time the screens come back for very short period of time .
Any ideas ?Also like to know if the screen can be tested on the table ,so far I cannot turn on the spare screen ,even with
2 lines of supplies ,R,G,B and H+V sync signals..
Thanks !

M1DJF
30th January, 2015, 11:21 AM
if you provide make and model that would be helpful

TR0UBLESH00TER
30th January, 2015, 12:58 PM
3 pics :
dash off a similar vehicle Pathfinder R51 2005
25915EA20A navi unit

28091EP000 screenhttp://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=297223&stc=1http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=297224&stc=1http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=297225&stc=1

TR0UBLESH00TER
18th April, 2015, 06:13 PM
Diagnosed but not cured ..fault is the main BGA IC ,when cooled with spray it works for a couple of seconds ,finaly died ,may rest in peace for ever ,because this Mxxxxxx chip not to be found anywhere..
Anyway found another navi unit but I don t know if swapping is just plug & play or plug & pray ,Nissan Consult needed ?It has CAN connections ,car is built in 2005...

simaservis1108
18th April, 2015, 09:12 PM
Get me picture of that IC,maybe I can help.

TR0UBLESH00TER
19th April, 2015, 01:13 PM
As a final question ,in lack of Nissan Consult coding can be done swapping some eeprom/MCU ?