Opel Astra G y20dth PIN

[Jashmine1983]

Hy to all!
Can somebody help me with a PIN from eeprom atached?
I don't have the immo box, only ECU and I need to sync it to car.
I've read on forum about immooff solution but I saw It not always works so i need to sync the ecu, guessing is the best solution.
Thanks!

ECU info:EDC15M, Bosch 0281010050
CAR info: Astra G y20dti, year 2000, 74KW

297339

[Jashmine1983]

Anyone for an ideea?
Any help will be appreciated.

[Jashmine1983]

No one? Any idea will be helpful....

[autoden]

Will car prog pull this pin?
autoden

[fanos]

Read TMS from immobox and put here

[Jashmine1983]

I don't have the immo box. It's just the ECU.
Carprog does not have this type of ECU.
Pin code must be in eeprom...but I don't know where. :)

[fanos]

try this and respond me

[Jashmine1983]

try this and respond me

Thanks!... but is no permanent IMMO OFF on this ECU, after a few starts the IMMO reapers in ECU.
This is why I need PIN.

[fanos]

try this and spoke

[Jashmine1983]

try this and respond me

I've tried immo off by aetool, ecuvonix.....etc, no go.
I just want the PIN from this eeprom.

[TPS]

PIN - 7948

regards

[stalonerambo]

7948 or 9478

[Jashmine1983]

PIN - 7948

regards

Thanks! It works!

[bobasspr]

Hello. It is possible to read PIN code from 24c04 from Diesel Ecu? y20dtl. thanks

[tirnanic malisa]

Read the imobox and eject the file

[miroopel]

Hello. It is possible to read PIN code from 24c04 from Diesel Ecu? y20dtl. thanks


.....................7926...............

[bobasspr]

Code is corect. Thank You. regards.

[raisal976]

Salve, ho il codice della macchina 0989 ma non ho il file da mettere nella eprom 24c04, la macchina in quesione è una opel astra 2.0 dtl con centralina bosch che finisce con 869.
Qualcuno può inviarmi un bin con il codice 0989 già pronto oppure se qualcuno mi può illustrare come mettere il codice nel file grazie mille.

[miroopel]

Posted bin file.

[raisal976]

Ciao, gentilmente potresti inviare un file bin con il codice 0989 grazie.

[volodin69]

Please, write in ENGLISH. I can send you an eeprom dump with your desired pin code,but will not help you. You have to pr9gramm the immobilizer with ecu and transponder key.
Read ypur 24c04 eeprom and post it here if you need the code.

[raisal976]

Ciao e grazie, purtroppo manca il file 24c04 perché quando hanno scodificato non hanno fatto il backup, in mio possesso ho solo il codice di sicurezza che mi è stato fornito da opel. Ci sarà qualche soluzione?
Non so se sbaglio ma devi modificare un file bin e portarlo con il codice 0989 almeno credo o non so che tipo di modifica si possa fare per creare un bin funzionante.


Hello and thank you, unfortunately the 24c04 file is missing because when they scodificato they didn't make the backup, in my possession I only have the security code that was provided to me by opel. Will there be any solution?
I don't know if I'm wrong but you have to edit a bin file and bring it with code 0989 at least I think or I don't know what kind of modification can be done to create a working bin.

[Gesha Nemirov]

Hi . Try ..................

[volodin69]

I don't know if I'm wrong but you have to edit a bin file and bring it with code 0989 at least I think or I don't know what kind of modification can be done to create a working bin.

That is what i've said. Will be useless. Or not... if you have OP-com :)
With this Gesha Nemirov eeprom dump, you can use code 0989 to reset the ecu and then go to immobiliser and reprogram ecu with the same code, in order to start the car.

[raisal976]

Ciao e molte grazie per il file, come posso trovare il codice chiave sul file bin di 24c04 se possibile, molte grazie
952975
Hi and many thanks for the file, how can I find the keycode on the bin file of 24c04 if possible, many thanks
From the data I have in my possession could I get a working bini file?

[volodin69]

Here. At this axdress, inverted bits

[raisal976]

Qui. A questo indirizzo, bit invertiti

Hello and thank you, as far as I understand you can find the security code at this address, I need to know where the key code should be put in addition to the security one because I have the keys with code s 1690.
can you help me figure out where i put the key code, thanks a lot

[volodin69]

Take Opcom and program the ecu. First reset ecu, then program ecu to immobiliser. That is all.
How to do it: https://youtu.be/brebw0u12zM

I don't understand what key code you have or what you ask there...

[miroopel]

Code key S1690 in immo box not in engine ECU

[raisal976]

Quale interfaccia usare con op com, in mio possesso ho la kwp 2000 plus ma non so come farla comunicare con op com

[raisal976]

953269
Si può recuperare un bin originale con i dati per questa centralina con key 0989, sto impazzendo?

[vladanr]

code of car is 0989 ,s... is mehanical code for key.with op com go to engine ecu,programing,reet ecu,than go to immo ,programing,immo function,mark engine ecu change and program ,thats all

[raisal976]

Non riesco a comunicare con op com, non ho interfaccia op com ma solo software, posso comunicare con kwp2000, delphi, kess v2, galletto 4 ?

[staicudavid94]

Hy all, can someone read pin from this dashboard dump?

[pawl]

there is no pin in the dashboard, read the box, there is a tms in the ignition switch