can`t write bmw 320d 136cp with galetto error on writing FORMAT_0A

[crackerx]

can`t write bmw 320d 136cp with galetto error on writing FORMAT_0A
i have read succesfully the ecu but can`t write..i never saw this problemhttp://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=297543&stc=1
ecu hw 0281001445

[Babos]

car start now?
If yes try to write original file for test.

[overs0ull]

I done a lot of them with MPPS v12 read/write not a problem .
If the car start try to flash ori file and ,try to flash the mody file after , or get the ecu out and read/write it on programmer

[dominik.m]

THE BEST TOOL write this ECU by OBD is KWP2000!

[lucim12]

I tried to do 3 of those cars but nothing works
tried with galletto 1260, v50, v54, mpps v13, kwp2000, and kess :giveup::giveup:

[kelekele]

If nothing helps,open ecu ,remove flash and write with programmer.This is best option for edc15 ecu.

[kire106ka]

Send what you read from ecu here and send mod file maybe problem with files and at the end you need programer open ecu inside 2 epp you need separate mod file with cks and write i will help you if you like
Regards kire

[boomeer]

To late I think in a first write galetto delete all ident and other first block in file and now all flashers give error in writing. ... the right solution is resold flash and give all files here ... other way may be this ecu have boot mode try in boot write ori file

[crackerx]

i have done a lot of this type of ECU with fgtech galetto
this car not working!
car is starting ok, no problems, read ok the ori file but i can`t write the mod fie.mod file is good

[crackerx]

LUCIM12 working excelent with mpps and fgtech galetto v53 if the k-line protocol is ok (hardware)
kess not working
kwp2000 not tested

[bobolin4o]

Open ECU and look with your eyes... are there two chips 29Fxxx or someone (before you) has put 27Cxxx...
It's from my experience...
Regards!

[kelekele]

Yes man,if is 27cxxx that is OTP and can be programed once.

[crackerx]

I abandoned car


kill-time

[mario38]

can`t write bmw 320d 136cp with galetto error on writing FORMAT_0A
i have read succesfully the ecu but can`t write..i never saw this problemhttp://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=297543&stc=1
ecu hw 0281001445
I recommend reading the complete file .. you've selected only the table !!
before writing you need to fix cks .. this car is very simple

[jjrp255630]

change drivers on galletto