PDA

View Full Version : SOME HELP PLEASE....IN A IAW 5NF.T2 DOBLO ECU.....WHICH CHIP IS PROGRAM STORED IN?



kugglefischer
2nd February, 2015, 12:06 PM
Hello all....

can some good freind tell me where (in what chip) is the program stored in this IAW 5NF.T2
Marreli ecu?

because i have a IAW 5NF.T1 and when i plug it on the car the dash dosnt work properly....
the car starts! ..because i have done an immo off.....

so i need to change the SOFTWAREhttp://cdncache-a.akamaihd.net/items/it/img/arrow-10x10.png (http://www.digital-kaos.co.uk/forums/#) from .T1 to .T2.....
And i need some help to locate the chip its stored in to swap it ....

*** Is it in a 28 pin chip that says on it...5NXX1-2A/72251G2MC/LKN?


can some one please help?

i know yellowstilo is good at this type of ecu?

but i would like all other members help that have this experience to give me a hand....

all help is much appreciated!

thanks in advance...

K

kugglefischer
2nd February, 2015, 12:34 PM
or if there is a way to read this with ..like galetto 1260?
thru pins in plugs...or?
on pcb board?
it seems to have a MC68F375 micro i read in internet.....?
not sure where it is? i can see it.....

can i get so help either way?
thank you!

Fantomisback
2nd February, 2015, 12:52 PM
Hello all....

can some good freind tell me where (in what chip) is the program stored in this IAW 5NF.T2
Marreli ecu?

because i have a IAW 5NF.T1 and when i plug it on the car the dash dosnt work properly....
the car starts! ..because i have done an immo off.....

so i need to change the SOFTWAREhttp://cdncache-a.akamaihd.net/items/it/img/arrow-10x10.png (http://www.digital-kaos.co.uk/forums/#) from .T1 to .T2.....
And i need some help to locate the chip its stored in to swap it ....

*** Is it in a 28 pin chip that says on it...5NXX1-2A/72251G2MC/LKN?


can some one please help?

i know yellowstilo is good at this type of ecu?

but i would like all other members help that have this experience to give me a hand....

all help is much appreciated!

thanks in advance...

K




hi T1 and T2 is not same ecu u must finde T2 and change only eeprom from old to new ecu all be fine

best regards

kugglefischer
2nd February, 2015, 01:14 PM
hello
please explain the diffewrence between t1 & t2....is it Can line?

i dont need to swap...the eeprom (95160) i can do either virgin or immo off...thats not my problem...

its the software....

the instrument cluster dosnt work with t1....the car has originally t2!

thanks for any help i can get....

K

Fantomisback
2nd February, 2015, 01:59 PM
i told u hardware is diference in that 2 ecus i have problem u must finde T2 like orginal then will work

dominik.m
2nd February, 2015, 05:35 PM
ECU IS SIMILAR?

kugglefischer
2nd February, 2015, 08:22 PM
hi T1 and T2 is not same ecu u must finde T2 and change only eeprom from old to new ecu all be fine

best regards

ok mate
thanks for your reply....

kugglefischer
2nd February, 2015, 08:22 PM
ECU IS SIMILAR?
Immo isnt my problem...

thanks

pinotec
2nd February, 2015, 09:20 PM
read micro old ecu , and write in new ecu with fgtech
automatic virgin immo