PDA

View Full Version : Land Rover Discover TD5 2003 2.5diesel



czaderx
5th February, 2015, 09:02 PM
hi all,

I have Discovery TD5 2003. Car was running perfect till today.
Remote control can't open/close any doors.
I can open a car with a key but then when open the door alarm is getting active -horn and flash light as well.
Only one solution to stop it is turn key in door lock.
When try to turn ignition is happened too same (horn and lights) needs to remove the key and turn in driver lock then stop.
car is not starting, all fuses are ok.
unit on the roof is dry- no water damaged.

Any idea?

thanks

willywonker2010
5th February, 2015, 11:34 PM
if remote don't work to unlock do door immo stays active

czaderx
5th February, 2015, 11:51 PM
That's what I know so far. I wonder if door latch can make it so confused?

Kev10001
6th February, 2015, 09:36 AM
Do you have EKA code for the vehicle if so try input code using drivers door lock..

czaderx
6th February, 2015, 10:09 AM
No I do not have. Any chance to get that code from ecu/bcm/key or etc?

will4u69
6th February, 2015, 11:14 AM
Check remote receiver under headlining normally they go faulty with condensation its behind rear sunroof.
Around ?55 to replace.

Sent from my GT-I9300 using Tapatalk 2

czaderx
6th February, 2015, 02:02 PM
Any idea how to remove immo?

czaderx
6th February, 2015, 02:12 PM
What is that sticker on key inside?

totalkey
6th February, 2015, 02:40 PM
You have 3 options. First get eka code from dealer and disable immo from door lock.
Second change remote module. Third immo of and short to starter
do search in dk and you will find all the info you need

czaderx
6th February, 2015, 03:51 PM
Fixed- i checked remote receiver under headlining- resolder all pcb and is working now.

@totalkey- do you think that immo off (93c66 change and cutting pin 34 is working on that model?)
there is no alarm box under the dash. alarm is integrated with bcm

thanks all for help