View Full Version : Fiat Iaw 5Af hw 303 no wrtie just read
roman_auto
6th February, 2015, 11:51 AM
Hi all
i am trying to write back the file to this ecu but give error on serval programmers, and i did drill a hole and put boot but just read no write , someone know mybe what coulf be the resson ?
Thanks
yellowstilo
6th February, 2015, 01:54 PM
you have to viriginise the ecu before writing....
roman_auto
6th February, 2015, 02:01 PM
you have to viriginise the ecu before writing....
yes immo off, now i menage to write the file with Piasini only with 256k , it is ok for immo off.
Fg and kess have 320k but cant write the file back. any idea ?
Master01
6th February, 2015, 06:01 PM
đđĐđß$đĐßđßđßđđääđłldkf>>;*;ßßߤߤ;>>;>ßߤ]$ß$÷÷×ßß]¤¤¤]ß$$[ß[¤ĐĐß[ß...
roman_auto
7th February, 2015, 09:27 PM
I read it and write it only with Piasini , and the immo is in the flash st10f168 but my file is 256k, my question is is thr immo in this 256k ok ?
i need to immo off
Thanks
roman_auto
8th February, 2015, 09:40 PM
Ok now all working read/write just need Immo off file if some one have it and please can upload it.
5AF.P3 Hw303 Punto 2005 Manual gearbox
Thanks
bearheroes
8th February, 2015, 10:21 PM
can you please post steps?
roman_auto
8th February, 2015, 10:30 PM
can you please post steps?
steps of what ? how i read you mean ?
bearheroes
8th February, 2015, 11:00 PM
how you write...you made immo off the Piasini file?
simaservis1108
9th February, 2015, 01:30 AM
In all Fiat ECU's immo blocks the manipulation of flash.
So it is virgin first then write/change flash.
Or for example unsolder eeprom when writing EDC15 on table.
roman_auto
9th February, 2015, 08:19 AM
how you write...you made immo off the Piasini file?
Piasini read only 256k and i did not mange to do immo off yes, now i read in Fg just in Tool mode toread and write decode file, and now i working on to immo of this cause in Fg the file is 320k so it included the info of the immo.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.