BLAUPUNKT - WERKE GMBH BNO 881 7 612 001 371 CODE

[zuljko]

NEED CODE FOR BLAUPUNKT - WERKE GMBH

BNO 881
7 612 001 371
NAVIGATION 2D
4B0 035 192 F
014AUZ1Z1Y0390834
PLEASE HELP ME, THANX

[nigrou]

salam
code in fis

[ilen]

read eeprom 24C32, and put damp here...

[zuljko]

fis ? EEPROM or PROCESOR or FLASH ? THANX

[zuljko]

OK
READ EEPROM

[Faraday]

sandwich, eeprom and MCU


http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=298620&stc=1http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=298621&stc=1

[zuljko]

whether there pinout eeprom 24C32 that goes on board, or to be read processor

[ilen]

do not touch module fis ...
open underside of the motherboard...http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=298624&stc=1

[zuljko]

Thanx, whether to connect the power supply and connect to the SCL and SDA and then I'm detecting 24C32, or to an on-board power and ground Vcc Vss?
or just to connect SDA and SCL, and turn on the power for normal radio, so that I can read the eeprom? thank you

[sergionel]

turn on the radio and read eeprom. only connect scl, sda and ground.

[ilen]

connect SDA and SCL, and turn on the power for normal radio....http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=298626&stc=1

[zuljko]

https://www.dropbox.com/s/0uw2kp1qluqblk9/24C32%20NAVIGATION.rar?dl=0

READ DUMP 24c32
advance to thank you for the great help, thank you all for your patience

[kappa1]

https://www.dropbox.com/s/0uw2kp1qluqblk9/24C32%20NAVIGATION.rar?dl=0

READ DUMP 24c32
advance to thank you for the great help, thank you all for your patience

Code is 0892

[ilen]

Put this damp....298644This dump is ok .... second I mistakenly sent the same as yours

[zuljko]

code 0892 not working

[kappa1]

code 0892 not working

Code is 100% 0892 not variant is mising pin SAFE 2

[zuljko]

cannot write dump

[zuljko]

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=298645&stc=1

[zuljko]

I was able to enter this dump, but the code 0203 is wrong

[ilen]

with which the programmer to use .. you're writing a new damp...?
I know I sent you your damp same mistake .... Try this298648

sorry my mistake.....

[kappa1]

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=298645&stc=1

Put 3 + after navi work

[Faraday]

code 0892 not working


This code 100% connect navi in the car.

[zuljko]

This radio is from another car, and there is no connector for navigation, it is likely that a problem that will not apparent in due navigating though :( thank you all for your help

[kappa1]

This radio is from another car, and there is no connector for navigation, it is likely that a problem that will not apparent in due navigating though :( thank you all for your help

Yes, connect 3 x +12 V and radio will accept code

[BAKHTILE]

please CODE

BLAUPUNKT GMBH
7 612 001 010
BNO 881
SKODA Radio Navigation
1U0 035 191 A
SKZ1Z7C3241295


8 618 842 980
2046858

[NissanLaurel]

503609 I need code

[fryderyk 10]

Read eeprom in FIS-modul for code.

[zimzia]

Please code bno881 Fis 24c32 Thanks

[irfa]

Please code bno881 Fis 24c32 Thanks
try code 0923

[zimzia]

OK it works
Thanks