PDA

View Full Version : TOYOTA AVENTIS 1.8 need help with key



antvorskov2006
13th February, 2015, 08:40 PM
Hello.
I have a toyota aventis 1.8 year 2002 with lost keys. i have read eprom form ecu
and make key but does not start. i also try to swap the byte. Please help.

simplo
13th February, 2015, 10:36 PM
try this dump with the same key you have made try and report best regards

antvorskov2006
6th March, 2015, 04:27 AM
thanks but dont start
try this dump with the same key you have made try and report best regards

antvorskov2006
6th March, 2015, 04:55 AM
I also have a other toyota aventis 1.8 2002 ECU with same part number and with immo in ecu (also lost keys).
This is the same problem , car dont start. I have try to make key from dump with tpx2 transponder with effi ,tango and fvdi it give me same
TIRIS Format .7E 67 A9 C0 06 00 00 00 00 43 D7 7E 00 00. when i read tpx2 transponder. but car dont start.

Please help

gokey
6th March, 2015, 07:17 AM
toyota avensis 2002 used 4d transponder

Arnold42
6th March, 2015, 07:34 AM
His Toyota use 4C key
Try this.

antvorskov2006
7th March, 2015, 03:32 AM
His Toyota use 4C key
Try this. That have I also try see post 1, But thanks

antvorskov2006
8th March, 2015, 02:41 AM
please some one that can help

keygargoil
8th March, 2015, 04:48 AM
here try this one out

Gardner3
8th March, 2015, 08:18 AM
Use Carprog to do this car

antvorskov2006
9th March, 2015, 03:35 AM
here try this one out
Thanks , but I have also try to swap the byte , just with key 1 . I have not try to swap the byte in key 2 address, but if it does not work with key 1 I think it's the same with key 2.

antvorskov2006
9th March, 2015, 03:46 AM
Use Carprog to do this car
Carprog does not support toyota aventis from 2001 - 2002 with 93c56 chip. I have try with toyota corolla , It read my txp2 transponder and
writes it into the file. But it writes it as I did in post 1. if I select key 1

Gardner3
9th March, 2015, 01:05 PM
Use Lexus ls200 93c56 in Carprog

antvorskov2006
10th March, 2015, 07:07 AM
Use Lexus ls200 93c56 in Carprog
I have use ls200 93c56 in Carprog , it give me same solution like in post 1. Only difference is key and dump.
TIRIS Format 7E 3E B3 98 05 00 00 00 00 A2 65 7E 00 00

ninja123
10th March, 2015, 09:04 AM
I have had some awkward toyota in the past, i use an old EH2 head so dump is original, car starts, then program another 4C with manual method :)

ninja