Mercedes Vito emulator dump empty

[jack44]

Hy friends,
please help me .

ECUA 000 153 02 79
hw 33.98 sw 20.99
ED6016 CR1,7 2,2 4 ZYL BOSCH 5plugs
0 281 010 231
06.08.00
Mercedes vito

I mounted emulator and when I read with programmer eprom dump 24c02 data is not complete trench.
please look into it tell a review please.
maybe you have a backup.
I must edit In memory 24c04 in the address 1EE to 1F9
type 2A 4E 00 00 FF FF 00 9C D4 13 56 01.
but not found.
thank you

[jack44]

299490
please see this
and replay
thenks

i nead wirgin ecu dump (original).:banghead:

[janusz21]

Your bin to small , eprom 24C04 :stung: programator :rofl:

[jack44]

hy janusz21,
yes is to small (corrupt), do you have one virgin?
or write another from another ECU which is CR1?
you think not read well with programmer?
i tried 2 times and same bin.:02.47-tranquillity:

[jack44]

can put another bin in this ECU? in Ecu A 000 153 02 79
i mount emulator and wsp is out?

friends you help my :bawling:
thenks

[jack44]

hi guys,
i found an origina file from other.ECU mercedes Vito 2,2
I can write in 24c02 ?
but must be modified address 1EE to 1F9
type 2A 4E 00 00 FF FF 00 9C D4 13 56 01.

what you say a work?
thenks 299618
you can modify for me ?
please

[janusz21]

What programmer you read this, not 24c02 , Reads as 24c04

[jack44]

hy
janusz21
thenks you are right is 24c04
mi programmer is TL866CS
see new bin please .is full now?
you meny edit this line address 1EE to 1F9
type 2A 4E 00 00 FF FF 00 9C D4 13 56 01.

299655

I read an older post and you have same Ecu A 000 153 02 79
hw 33.98 sw 20.99
ED6016 CR1,7 2,2 4 ZYL BOSCH 5plugs
0 281 010 231
06.08.00
Mercedes vito
:congrats::marchmellow:
(http://www.digital-kaos.co.uk/forums/member.php/74765-janusz21)

[janusz21]

TRAY THIS BIN

[jack44]

:beer: thenks frend
how did you find address 1EE to 1F9?

can you explain
to know and I.
i comme with replay
thenks man:cheers::shakehands:

[MarkPRP]

ITS A 24C04 - NOT 24C02

That is your problem

[jack44]

thenks frend Mark prp
see bin mercedes vito 24c04.rar (http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=299655&d=1424023478) and VITO OK.ra (http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=299678&d=1424031551)
ist ok? little help frend
sugestion
:hmmmm:

[janusz21]

writ bin ,conect emulator, disconnect immo and tray

[jack44]

hi frend
janusz21 (http://www.digital-kaos.co.uk/forums/member.php/74765-janusz21) ,
I tested and Car will not start:banghead:
I put and starter the direct with one cable not start
cable from thermik imo. cut white and green can h ......can l
I took pictures take a look i cand find wrong.
i believe is bin from 24c04 ECU.http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=299967&stc=1http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=299968&stc=1http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=299969&stc=1http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=299970&stc=1http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=299971&stc=1

[jack44]

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=299976&stc=1http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=299977&stc=1
everyone is welcome with tips

i thanks so much friends:party:

[janusz21]

Tray this bin , emulator its no fault ,

[janusz21]

clear private messages

[jack44]

hy ,
i clear private messages.
try bin and come with replay
thenks frend

[avital]

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=300071&stc=1

Maybe conection is wrong?, in foto my made emulator for CR1 systems with correct conection.
and also write to eeprom from adres 0x1E0 this data:

FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2A 4E
00 00 FF FF 00 9C D4 13 56 01 FF FF FF FF FF FF

If hw emulator is ok this must work.

[nmclogandci]

or you use china bad mercedes cr1 emulator

[jack44]

hi avital,
thenks or replay and photo
Yours is another model and cable red (+)to GND - to ecu
were you bay? send privat mesaj.
thenks for your help
danke:ciao:

[jack44]

hi
nmclogandci (http://www.digital-kaos.co.uk/forums/member.php/318983-nmclogandci)
i bay to UK
is bed?:hurt:
you are another model?
please photo and how to .
thenks
alles gute

[avital]

hi avital,
thenks or replay and photo
Yours is another model and cable red (+)to GND - to ecu
were you bay? send privat mesaj.
thenks for your help
danke:ciao:

Not buy its my made project ... http://www.digital-kaos.co.uk/forums/images/smilies/smile.pnghttp://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=300219&stc=1

[jack44]

super cool
you is capitalist:elefant:
and work 100%?
in privat how much
ok?
or is ghift for promotion to testen?
i love you sir
thenks so long
privat mss:party :

[jack44]

hi guys,
We test the new bin
THE CAR NO STRART
i thing emulator is bad
thenks in all for help
i bay a new emulator
astalavista baby:devil:

[jack44]

Hallo friends.
i back with news:vroam:
new emulator came
Tomorrow we test

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=301688&stc=1

[jack44]

:party ::celticparty:

[jack44]

the car no start:banghead::banghead::banghead::banghead::bang head::banghead: