PDA

View Full Version : Lamborghini lp560 2012



diagtech
14th February, 2015, 07:35 PM
Hi i have a file for lamborghini lp560 2012 24c08 showing 10109 mls could anyone get it to 8612 mls thanks cant get it close enough with my kit tried a few different ones thanks

Rerouter
14th February, 2015, 08:53 PM
As you have already attempted to change it, would you be able to point out what location you think it is at? i am seeing a few possibilities, but nothing concrete yet,

diagtech
14th February, 2015, 08:58 PM
Hi I haven't actually changed it all my boxes write in blocks of 4000km same dash as Audi A4 so I know I will end up with around 7500 and I need 8600 thanks


Sent from my iPhone using Tapatalk

chrismoore02
15th February, 2015, 12:04 AM
Put 7500 on it then and take it for a long fast test drive :)

diagtech
15th February, 2015, 12:10 AM
Wish it was as easy as that could do the extra in a weekend given the chance


Sent from my iPhone using Tapatalk

mislav88
15th February, 2015, 01:12 AM
why dont you try obd as audi rb8? you have eeprom backup so nothing to loose.

diagtech
15th February, 2015, 01:22 AM
Tried obd with enigma and dp3 access error been told enigma can do it by eeprom but i dont own one if anybody with one could take a look thanks

wiseman
15th February, 2015, 02:53 AM
I'm sure smok xcan or deja vu would do this within a couple of km

Rerouter
15th February, 2015, 04:06 AM
As your boxes set to blocks of 4000 could you upload a dump with it set like that. Without a starting point I cannot assist you...

bluetaily
16th February, 2015, 03:48 PM
As your boxes set to blocks of 4000 could you upload a dump with it set like that. Without a starting point I cannot assist you...

Hi!

Take you OBD tool but connet direct to the conector on the back of the cluster. I did it on this way with my Lambo :)

javyb
16th February, 2015, 05:23 PM
Hi!

Take you OBD tool but connet direct to the conector on the back of the cluster. I did it on this way with my Lambo :)
Do you have pin out?

diagtech
17th February, 2015, 10:25 PM
Just a reminder if anyone can help thanks

diagtech
17th February, 2015, 11:45 PM
Here is a file changed with nyo4 it wouldnt give me the miles i wanted that must work the same as other programmers but this one has around 3106 mls

bluetaily
18th February, 2015, 08:29 AM
Do you have pin out?

Hi!

Not right here, but use Audi RB4 or RB8...dont remember.

bluetaily
18th February, 2015, 08:31 AM
Remember this car stores millage in gearbox too.