PDA

View Full Version : 607 pin


plagu
14th February, 2015, 08:52 PM
Hi,

Can some one get me pin from this, i cant see it like normally and nyo4 just tells the mileage....
And please let me know what tool to use...
299578

its siemens bsi with 93c66
drewdom
14th February, 2015, 10:33 PM
Hi. Your dump looks bad.
Bllinda
14th February, 2015, 11:37 PM
....798P....
stoyanov
15th February, 2015, 03:19 PM
If not work try 97P8.
topclef
15th February, 2015, 04:38 PM
Pin : 8P79
Bllinda
15th February, 2015, 05:35 PM
Please report

....798P....
plagu
17th February, 2015, 11:39 AM
sorry havent tested yet will report soon (work in progress).

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=299880&stc=1
plagu
18th February, 2015, 08:49 AM
Bllinda, pin was correct, thanks
plagu
20th February, 2015, 12:57 PM
Eh, one problem, the pin is correct i can get car running eg, but when learning keys it asks "high frequency code" wtf is that and where can i get it, i cant get remote to work without it....
Shmortz
20th February, 2015, 05:04 PM
you don't need any high frequency code, after programing keys it tells you to program high frequency remote controls and how to do it...
plagu
25th February, 2015, 11:28 AM
I actually needed the "high frequency code" there was a sticker in key's pcb and i typed 6 first digits from it to bsi "high frequency code learning" thingy and after that i could sync keys with the 10sec lockbutton trick.

I have learnt couple of psa keys and this 607 is the first one that i have seen with that "high frequency code"