PDA

View Full Version : Peugeot Citroen PIN CALCULATOR PSAi2EMU has anyone tried it


coolsoda
15th February, 2015, 11:46 AM
299609

Has anyone tried this Peugeot Citroen PIN CALCULATOR ,selling on ebay for ?65

http://www.ebay.co.uk/itm/Peugeot-Citroen-PIN-CALCULATOR-and-IMMOBILISER-IMMO-EMULATOR-from-2001-CAN-/131421643883?

Few videos on youtube

https://www.youtube.com/watch?v=GzFXtdFrzuo&feature=player_detailpage

Does it require a programmed key to work
paul_12345
15th February, 2015, 12:17 PM
Has anyone tried this Peugeot Citroen PIN CALCULATOR ,selling on ebay for ?65

http://www.ebay.co.uk/itm/Peugeot-Citroen-PIN-CALCULATOR-and-IMMOBILISER-IMMO-EMULATOR-from-2001-CAN-/131421643883?

Few videos on youtube

https://www.youtube.com/watch?v=GzFXtdFrzuo&feature=player_detailpage

Does it require a programmed key to work

I emailed and they say it needs working key for pincode.

From what I gather it decodes comms beween bsi and ecu to get the pincode - if this works it will be far better than avdi smok etc for spare keys as it wont need service mode and have no risk of damaging the flash of the bsi

the price is too cheap if it does work it should be at least 10x higher
coolsoda
15th February, 2015, 12:24 PM
I have read his feedback and buyers state it works,it was also only ?50 before xmas
kleidaras
15th February, 2015, 02:28 PM
I have use it few times and work's ok until now.
Master01
15th February, 2015, 02:56 PM
Supported ECU type?
kleidaras
15th February, 2015, 03:09 PM
i have use this on c3 and c4 can system. this is only for can system.
instakeys
15th February, 2015, 04:26 PM
Just ordered one. Will post results whats working/not working here when it's here
Bllinda
15th February, 2015, 06:35 PM
I think that looking BSi unit.

Supported ECU type?
H.Wessel
16th February, 2015, 10:33 AM
I think that looking BSi unit.
Hi

If you look at the videos is getting pin from a ecu on the desk, so no bsi to read the pin from.

Best regards
H.W
paul_12345
16th February, 2015, 10:57 AM
Hi

If you look at the videos is getting pin from a ecu on the desk, so no bsi to read the pin from.

Best regards
H.W

No, the device has two main functions one is pin code calculation via obd.. the manual says it intercepts the signal from bsi to ecu, this was confirmed by email and they said pin code from obd needs working key.

Another function is the emulator programming this allows you to enter the pincode into the emu to run the car without key, the video that shows connected to the ecu is the ecu decode the manual says this can take hours.