View Full Version : audi a3 2010 8p0920982m disassembly
djollie
19th February, 2015, 04:15 PM
hi
can anyone guide me how to disassemble this cluster.
cluster is dead after car coming out of body shop oven.
i'm hoping that it will be repairable via programming.
thanks
dj
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=300437&stc=1
djollie
19th February, 2015, 08:26 PM
edit.
got it opened now so could anyone help with the locations of chips i need read and reprogramme.
thanks
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=300467&stc=1http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=300468&stc=1
mislav88
19th February, 2015, 08:34 PM
micronas mcu + 24c32 eeprom on the side where connector is, see xprog manual for details
djollie
21st February, 2015, 01:46 AM
hi
will the lupu_sandu pinout work for reading both mcu and eeprom?
http://www.digital-kaos.co.uk/forums/showthread.php/450546-Please-help-me-to-recover-the-Audi-A3-2010?p=2428449&viewfull=1#post2428449
thanks
dj
mislav88
21st February, 2015, 11:43 AM
for mcu yes, eeprom you must desolder and read with adapter
djollie
22nd February, 2015, 01:22 PM
hi m8
thanks for your swift reply:)
i'm a little confused with regards to the pinout
my adapter looks like this-
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=300853&stc=1
xx
xx vdd(+5)
vpp xx
xx
reset xx
extal xx gnd
gnd xx gnd
lupu's pinout is like this
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=300854&stc=1http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=300855&stc=1
coxial - twisted black and white cable
tdo
tck
tms
tck
5v+
gnd
remove 0 ohm resistor
test
rst
can you tell me which cable connects to which pin?
i see also there is 2 tck?
thanks
dj
salkapone
22nd February, 2015, 07:21 PM
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=300884&stc=1
djollie
23rd February, 2015, 11:26 PM
i managed to connect to the micronas but i'm not sure read is correct as its only 4k??? :nightmare:
lupu_sandu
23rd February, 2015, 11:52 PM
This is not MCU. Is eeprom only (24c32).
MCU>Micronas secured>Micronas 3217
salkapone
24th February, 2015, 08:42 AM
lupu_sandu do you have a full dump micronas + 24C32 for Audi A3 8P0 920 932 urgently need ,,, I would be grateful if you have
djollie
24th February, 2015, 12:13 PM
hi
here is my read for the dash...is it recoverable?
thanks
dj
lupu_sandu
24th February, 2015, 12:55 PM
lupu_sandu
do you have a full dump micronas + 24C32 for Audi A3 8P0 920 932 urgently need ,,, I would be grateful if you have
I don't have for 932. I have 932A,932C,932D.
hi
here is my read for the dash...is it recoverable?
thanks
dj
Test this flash. Write back only flash. Pass in pm
salkapone
24th February, 2015, 01:10 PM
lupu_sandu and what do you think made this corresponds 932a and 932c,,,
djollie
24th February, 2015, 01:37 PM
hi m8
cluster still dead -no display
anything else i could try?
cheers
dj
arvedo
5th June, 2015, 08:19 AM
dk hello good day can help repair this box microna he died, thank you very much for your help
lupu_sandu
5th June, 2015, 01:43 PM
dk hello good day can help repair this box microna he died, thank you very much for your help
Micronas repaired. Pass in pm.
Can you post eeprom also please?
arvedo
5th June, 2015, 01:50 PM
here's friend
can help in these files are correct, died box
help please
lupu_sandu
5th June, 2015, 06:55 PM
Micronas dump is corrupt.
This will be ok. Leave original eeprom. Just write this flash
furnata
4th November, 2015, 11:32 AM
hi lupu can you please repair this dump for me micronas 3217g a3 2008 year
ups sorry wrong dump
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.