Digiprog obd conection

[aem]

Hi friends does anyone have a pinout photo with digiprog obd /db conection?
i try to read audi a6 2002 via obd and 1 lcm bmw and show conection error .or maybe i have to make some modification....

on clip is working

[aem]

Nowbody wanna make a picture to see colours inside obd plug?.......

[teerak2uk]

It's in digiprog thread

[aem]

Did you find it in 300 pages?....

[TULGEYWOODMAN]

Did you find it in 300 pages?....

Well if you are up a mountain snowboarding, maybe it's snow blindness?

[neksus]

Hi friends does anyone have a pinout photo with digiprog obd /db conection?
i try to read audi a6 2002 via obd and 1 lcm bmw and show conection error .or maybe i have to make some modification....

on clip is working

http://www.digital-kaos.co.uk/forums/showthread.php/282850-Digiprog-3-clone-questions-and-answers?p=1770308&highlight=Digiprog+obd+pinout#post1770308

Use serch! Good luck

[neksus]

Here's a photo!
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=301736&stc=1http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=301737&stc=1

[markony79]

A6 2002 its must be MM ( Magneti Marelli ) dash, then can do take dash out and do on the table
the Bmw LCM module, its not work good with Digiprog, better use the PA Soft

[aem]

A6 2002 its must be MM ( Magneti Marelli ) dash, then can do take dash out and do on the table
the Bmw LCM module, its not work good with Digiprog, better use the PA Soft

a6 is vdo and is not read old km...just let me write new km

[aem]

something is not good.i try to make a4 vdo 2005 via obd not work,seat ibiza 2004 via obd not work.........

[teerak2uk]

something is not good.i try to make a4 vdo 2005 via obd not work,seat ibiza 2004 via obd not work.........
Fix your cable and try

[aem]

every contact is ok i check n times....

[teerak2uk]

On mine was difficult to see because of glue so I cut mine off and replaced (post above is my picture/cable)