PDA

View Full Version : galletto v54 eu truck renault 500 dxi 2005 test



psico
1st March, 2015, 09:49 PM
hi, i read this truck obd2 with adapt for renault ,and read only 64kb , any test this truck for write mod galletto v54? any problem ?

thanks in advance.

automocion
2nd March, 2015, 02:23 AM
For sure your read its incomplete 64kb. Missing information from some torque limiters. ECU TRW EMS2 ecu its not posible to read complete over obd, need bdm or to have original file.
Original galletto makes complete virtual read from server.

AC_SHNITZER
2nd March, 2015, 06:56 AM
i have done this ECU with Galletto but only on BDM port , OBD read is not safest way . ECU is located on left engine side and need to unscrew just 4-6 bolts plus 2 fuel lines .

automocion
2nd March, 2015, 03:22 PM
If you give your original hw&sw number maybe I can get for you original bdm file. And if we have dont need to bdm, only write by obd and job done ;)

baltazar3
2nd March, 2015, 09:09 PM
hi, i read this truck obd2 with adapt for renault ,and read only 64kb , any test this truck for write mod galletto v54? any problem ?

thanks in advance.
Have simillar prob...I made adapter according to FGTech manual but when check Renault/Volvo Truck adapter seen that is nothing change ( Have chinese V54).Did You check pin 12 and 13 from male side on adapter where go on other side.
Thanks

psico
2nd March, 2015, 10:08 PM
this is mi read by obd2