volvo s60 d3 2010 new model

[epicsabi]

The speedometer counter turned from 134000km to 109000km, successfully processed. Cca 1 month later the counter turned back to ccm 134000km again. The process was repeated, and the counter turned back again after a month.


The procedures not in my workshop.
I don't have dumps.


Please help with some ideas.
Thanks

[markony79]

what tool you use ?

[epicsabi]

The procedure not in my workshop. I did not do it.

I dont know what tool.

[mislav88]

again...

door modules...

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=302454&stc=1

[Joxer]

what work is involved getting these modules out? can someone tell me how?
i know smok jtag nec does these. but need to know how much work to get these modules out.

And is this for each door? or only the front left and right???

Thanks

[mislav88]

front driver and passenger door. 2 minutes to get modules out. 2xT25 screws and pull door panel, it is right under there, no need to remove whole panel, just pull lower part and you can remove module.

you need both smok multitool licence to read flash by obd, and jtag v850 to write flash and erase eeprom on bench.

[Air]

The speedometer counter turned from 134000km to 109000km, successfully processed. Cca 1 month later the counter turned back to ccm 134000km again. The process was repeated, and the counter turned back again after a month.


The procedures not in my workshop.
I don't have dumps.


Please help with some ideas.
Thanks

look at here: http://www.digital-kaos.co.uk/forums/showthread.php/447785-VOLVO-S40-2013-dealer-problem/page3?highlight=volvo+s80