PDA

View Full Version : EDC16C34 Fiat BDM port fried repair



H.Wessel
3rd March, 2015, 09:17 PM
Hi

Anybody know if is possible to repair a bdm port from a fiat fiorino (EDC16C34, same as peugeot tepee and citroen nemo), another tunner put bdm reversed and not I can not read/write by bdm, and galletto can not read ecu by obd...
Maybe some fuse or something is broken?

Regards

budG60
3rd March, 2015, 10:53 PM
The bdm port is often directly connected to the mpc controller, so I am afraid you will need to find another ecu.
You can still read the eeprom (95160) directly from the chip, so you can read it and copy it to another ecu.

betrescudan
4th March, 2015, 02:56 PM
sorry mate...change the ecu

mishu_b
4th March, 2015, 03:24 PM
Hi

Anybody know if is possible to repair a bdm port from a fiat fiorino (EDC16C34, same as peugeot tepee and citroen nemo), another tunner put bdm reversed and not I can not read/write by bdm, and galletto can not read ecu by obd...
Maybe some fuse or something is broken?
Regards

if the 12V pin from BDM adapter was solder to 5V or 3.3V than the MPC5xx is dead for reading out of BDM.
If the car starts let it as it is - and find other ECU similar.

The eeprom - can be transported to any other ECU if it is still alive. It can be read via external programer SOIC8 as package.