PDA

View Full Version : pcr2.1 kessv2 pdf



lucim12
4th March, 2015, 12:17 PM
Hy dk mebers


Anyone have pcr2.1 pdf manual connections for Kess v2 1.89?

thank you very much

ominimicu
4th March, 2015, 12:23 PM
Here Do not use any other method than this one!
kess alo had a older one which damaged a lot of these ecus
302539

lucim12
4th March, 2015, 12:45 PM
thank you!
here is my version
am I ok?

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=302544&stc=1

lucim12
4th March, 2015, 02:32 PM
I belive that version of kess was not v2
anyways I am also going to read it with fgtech v54 just for safety..

ominimicu
4th March, 2015, 02:55 PM
i ment earlier version on the instruction manual, not of kess

MiH
4th March, 2015, 09:47 PM
2 ominimicu (http://www.digital-kaos.co.uk/forums/member.php/133668-ominimicu) :

This method can damage ECU too (unfortunately tested by yourself :( ). Especially the one manufactured after 2.2014.

ominimicu
4th March, 2015, 10:03 PM
but i have never damaged a pcr2.1

lucim12
5th March, 2015, 07:46 PM
back with reports
kess read it by obd ok, but at the end it gave a checksum error message, but the file was ok...
I put it on bench, did everything exactly as in manual checked everthing but it said no connection..
I did it with fgtech in the end..

ominimicu
5th March, 2015, 08:26 PM
check your fgtech tricore cable some have 2 wires inverted compared to original pinout

lucim12
6th March, 2015, 04:21 PM
it worked well as it was...:burnout:

lucim12
6th March, 2015, 04:30 PM
since v1.89 software is old and many boot mode manuals are missing....
can i use newer versions on this HW or will it block NXp?

ominimicu
6th March, 2015, 05:46 PM
use up to k suite 2.06. of course internet always disabled

lucim12
7th March, 2015, 09:20 AM
thx omi, but some reported many errors after using newer version..
is there any need for sd card files too ?

ominimicu
7th March, 2015, 11:36 AM
no, no need.