PDA

View Full Version : SIM32 ecu clone



budG60
5th March, 2015, 11:33 PM
I have a defect SIM32 ecu of a Kangoo 1.2 with the following number S120201212D.
I found another SIM32 ecu, also of a Kangoo 1.2, but it has a different letter at the end S120201212F.
I have copied over the 95160 eeprom contents, but no luck. I have tried to immo off, but no luck again.
When I install the "new" ecu the cooling fan is on all the time and does not start.
Any suggestions? I have attached the files.

budG60
6th March, 2015, 08:30 PM
nobody has a solution?

Shemek
6th March, 2015, 11:19 PM
hello mate,
what flash you have on this ecu?
thx,
s

twincam
7th March, 2015, 08:07 AM
There is no external flash in this ECU and You cant do immo off only virgin can be done ,if You want to copy ecu You need to swap this BIG processor :-) immo is there.

albertros
7th March, 2015, 10:05 AM
Hi,
the sim32 is available in 2 different clock speeds. This is set up by the software in the cpu.
So either get a unit which oppereates on the same clock speed or clone the cpu as well as eeprom.

houcem80
7th March, 2015, 09:59 PM
hi to all,

can someone send a vergine dump for sim32 s12204120 A

best regards