PDA

View Full Version : BMW delete errors



aslamaslam
7th March, 2015, 08:12 PM
hi to all
bmw 2004 e46 n42
BOSCH 303210dme 7531848
need to delete this error please
-2A61
-2A5B
-2EF5
-2C9C

BEST REGARDSSSSSSSSSSSSSSS

gitko
7th March, 2015, 10:46 PM
help yourself

aslamaslam
8th March, 2015, 12:37 PM
the same problem?????????????????????

Babos
8th March, 2015, 01:02 PM
In dashboard is ON LAMP or only dtc in diagnostic?

gitko
8th March, 2015, 02:37 PM
dtc should be only in memory,shouldn't have limp

aslamaslam
8th March, 2015, 08:51 PM
hi
my problem the light transmision code 146
i change the air mass for 5 times no use the problem isnot solved

i check all wires and mechanic transmistion every thing is ok

i noticed that the check engin lamp isnot light at all i think the lamp is not good so i checed it with the lanch with the dash the lamp is ok but it doesnt light with the car

may be the ecu need new software ?

303367

i want to delete code error 2D0F hot mss sensor signai

gitko
8th March, 2015, 10:22 PM
pass is the same

aslamaslam
9th March, 2015, 05:37 PM
gilko
thank you for you
but the same problem
i neeeeeeeeeeeeeeeeed to delete code error 2D0F hot mss sensor signal


best regards

morgano
9th March, 2015, 05:42 PM
hmmm, someone is playing "novice games" with someone else's car... lol

aslamaslam
9th March, 2015, 06:08 PM
to my friend morgano (http://www.digital-kaos.co.uk/forums/member.php/380986-morgano)


thank you
Is your last comment ?????????????
Do you have a solution??????????

morgano
9th March, 2015, 06:23 PM
My comment ... seems you didn't like :) Then i shut up.

BrunoPT
9th March, 2015, 06:28 PM
You have a P code?

aslamaslam
9th March, 2015, 06:31 PM
no (P) code

Vasily.U
9th March, 2015, 06:33 PM
If the car is automatic transmission GM, it can not work without the proper flowmeter. Check intake manifold for leaks, cats, etc.

aslamaslam
9th March, 2015, 06:41 PM
ok
can you delete this error and test with car?

Vasily.U
9th March, 2015, 06:45 PM
It can not be removed, the automatic transmission is in emergency mode .

aslamaslam
9th March, 2015, 06:48 PM
thank you
please read
hi
my problem the light transmision code 146
i change the air mass for 5 times no use the problem isnot solved

i check all wires and mechanic transmistion every thing is ok

i noticed that the check engin lamp isnot light at all i think the lamp is not good so i checed it with the lanch with the dash the lamp is ok but it doesnt light with the car

may be the ecu need new software ?

ERROR.rar (http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=303367&d=1425843982)

Vasily.U
9th March, 2015, 06:52 PM
Check intake manifold for leaks, cats, etc.
What live data at idle speed?

aslamaslam
9th March, 2015, 06:54 PM
thank you
please read
hi
my problem the light transmision code 146
i change the air mass for 5 times no use the problem isnot solved

i check all wires and mechanic transmistion every thing is ok

i noticed that the check engin lamp isnot light at all i think the lamp is not good so i checed it with the lanch with the dash the lamp is ok but it doesnt light with the car

may be the ecu need new software ?

ERROR.rar (http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=303367&d=1425843982)

Babos
9th March, 2015, 06:58 PM
Here mate use that file.

aslamaslam
9th March, 2015, 07:04 PM
yes i read all live data whith lanch
all is ok
the car run normal but after the transmition change 1 to 2 speed the lamp emergency mode light i scan this car after lamp light
error 146 whith control module transmition
error2d0f with control module engine

Vasily.U
9th March, 2015, 07:06 PM
Fault code 146 " CAN torque interface "
TCM "see" torque from mass air flow sensor via can bus.
What you don't understand?
Do not hurt the car and repair.

aslamaslam
9th March, 2015, 07:06 PM
thank you
what the error deleted in your file please

aslamaslam
9th March, 2015, 07:14 PM
Fault code 146 " CAN torque interface "
TCM "see" torque from mass air flow sensor via can bus.
What you don't understand?
Do not hurt the car and repair.

In your opinion, what is the solution
what is the problem??

Vasily.U
9th March, 2015, 08:00 PM
Check intake and exhust system