PDA

View Full Version : Sirius34 ( without CAN) immo off



Min2xx
10th March, 2015, 10:47 PM
Need immo off for Renault Clio 2002, 1,6l Sirius34 without CAN, S118301113. Car is away, need 100% solution. 4000- 7fff FF not work, no rpm signal!

kiszka
10th March, 2015, 11:11 PM
...........

Min2xx
10th March, 2015, 11:43 PM
What version you tested? I don't have car for testing :(

metercar
11th March, 2015, 06:42 AM
you are smoking grass?

skens
12th March, 2015, 12:45 PM
hi
well you did, cut immo line! the problem is somewhere else
must put the car on diagnosis! look crankshaft sensor until you started
regards

Min2xx
12th March, 2015, 03:53 PM
I removed resiztor in immo line ( like in most known picture )Diagnostic show 0 errors, immo not active. And prm is 0, before immo off rpm was Ok.

skens
13th March, 2015, 01:50 PM
hi
you modified the original?
must put the car on diagnosis! look crankshaft sensor until you started
regards

arvedo
13th March, 2015, 02:40 PM
show a picture of your plate ecu

Min2xx
13th March, 2015, 02:58 PM
Ok, will show, now waitng ecu back.

sokolomo
13th March, 2015, 05:25 PM
hi
Try theses files, post result
Regards

sokolomo
13th March, 2015, 05:27 PM
i forgot files sorry

Min2xx
14th March, 2015, 11:16 AM
i forgot files sorry
You sent dumps from another car and unknown esu, it can't be Ok :(

Min2xx
30th March, 2015, 06:37 PM
Still waiting for solution, tested many dumps ( immo off Ok, but no rpm )

Min2xx
30th March, 2015, 07:54 PM
Picture like this:http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=307081&stc=1

Min2xx
30th March, 2015, 07:55 PM
If I write dump from another ecu with immo off, rpm is Ok

prusony
30th March, 2015, 10:26 PM
Try... NO tested! (OFF to original FILE, PASS...)

Min2xx
31st March, 2015, 06:26 AM
Still the same, no errors: ecm faulty and immo signal, but still no RPM :(
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=307121&stc=1

Min2xx
31st March, 2015, 06:45 AM
I fuond working immo off similar software, but can't find secret

metercar
31st March, 2015, 01:40 PM
I fuond working immo off similar software, but can't find secret

this file is "off" solution tested?

smt
31st March, 2015, 02:15 PM
dont waste your time all immo file for this ecu ,car start but no rpm & temperature ,only emulator work good

Min2xx
31st March, 2015, 03:04 PM
RPM & temp ok, last what I can't find how to remove eror code: 5004 immo line open/short !

dgmcan
4th April, 2015, 02:39 PM
Hi!

Try these files may one of they work ok.

Min2xx
4th April, 2015, 03:49 PM
Pass please :)

hercamp
4th April, 2015, 05:29 PM
Hi!

Try these files may one of they work ok.
Can i have the pass for immo off renault? Thanks

hercamp
4th April, 2015, 09:01 PM
finally , the car start with the second file , is good push the pedal of this clio again , I just dont have the clnt temp gauge , and tach , but engine runn runn very good


thanks a lot





here is my file , if you can modify ; btw car is running ok now .

dgmcan
4th April, 2015, 09:51 PM
Hi!

Enjoy your file.

hercamp
5th April, 2015, 06:53 PM
I test the file , its works perfect , the 1.6 that dgmcan post before , not keep a good combustion and idle at 800 rpms , with the second file , I dont have tach , but idle is normal ,and rpms are normal , coolant gauge normal and i just want thank him because emulator will take 2 weeks to my shop , and with his file I can let the car of my friend goes .



thank you dgmcan

hercamp
6th April, 2015, 02:00 PM
file tested , its works perfect , tach and coolant temp normal , just was a wire cut broken .


thank you

paulixcr
7th December, 2018, 09:54 PM
file tested , its works perfect , tach and coolant temp normal , just was a wire cut broken .


thank you

hi! which one did it work?
could u send me?

kino123
7th December, 2018, 10:15 PM
PUT YOUR DUMP ORI FOR MAKE IMMO OFF