View Full Version : Renault M?gane Problem
pinheiro
12th March, 2015, 09:37 PM
Hi friends
I have a problem with a Renault M?gane Coup?, 1.4 - 16V
Ecu - Siemens Sirius 32.
The car doesn't start. By diagnostic there aren't any errors
The immo light never turns on in the dashboard. Could it be an immo problem? If I do immo off could it solve the problem?
The car doesn't start and the current doesn't reach the injectors or the ignition.
Anyone had a similar problem?
Regards
Pinheiro
alessioblaupunkt
12th March, 2015, 11:03 PM
Battery voltage? Does it crank? Have you tried second key?
jokas
13th March, 2015, 08:23 AM
uch problem?
5a fuse uch?
admiralx
14th March, 2015, 08:14 PM
central locking work??????
Meat-Head
14th March, 2015, 10:14 PM
Inertia switch. Immboliser light should flash. Had one once pin rotten on ecu under waterproof cover!
pinheiro
16th March, 2015, 09:28 PM
Hi friends
Problem solved.
It was a code problem. I've immo off the ECU and Worked OK!
Thanks
albertros
18th March, 2015, 02:01 PM
The uch should be immo type 1 and corrupted to immo type 2 or visa versa
Just swap back with clip or simular.
Very common with scenic as well.
justy22
19th March, 2015, 09:43 PM
what software did u use to turn immo off
Meat-Head
19th March, 2015, 10:02 PM
Justy mate contact the snake if its early rubber coated one.
if your carefull you CAN rub your jump leads down memory chip but deffo see snake if rubbered
justy22
20th March, 2015, 06:12 PM
Justy mate contact the snake if its early rubber coated one.
if your carefull you CAN rub your jump leads down memory chip but deffo see snake if rubbered
does anybody have the algo to decode meatys messeges
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.