PDA

View Full Version : elprosys dp3 blow up w221 320cdi S-class



Speedofix
13th March, 2015, 06:14 PM
When it Write flash i got "time out" and disconnect battery and try again. still timeout on 6% flash Write.

FAN runs all time and abs esp etc faultcode on dash.. think sam front is dead.

Can I fix this problem without buy a New front sam ?

Mario3
13th March, 2015, 06:27 PM
did you had power supply connected to car and pc ?

Speedofix
13th March, 2015, 06:33 PM
Have done 20+ With engine runing. So no Power supply and engine runing

pepi
13th March, 2015, 07:40 PM
What year is your 221 why front SAM , AVDI always advice to read and save eep and flash of CGW . The CGW is not on front SAM it is under steering on the left side.

Speedofix
13th March, 2015, 07:48 PM
This is 2006, no milage in dash just ----- esp and light etc faultcode also. So is not the front sam that is the problem, it's Gateway ?

vageric
13th March, 2015, 08:28 PM
yes CGW is the problem

Speedofix
13th March, 2015, 08:55 PM
located under Dashboard left side? need New or can try to update it Online With star?

sparkz02
13th March, 2015, 10:21 PM
Easy fix with star online happen to me before. You can try delete all data on memory card and try do it again.

diagtech
13th March, 2015, 10:25 PM
Dont delete all data because with used cgw if u edit chassis no dp3 remembers car and programs correct flash had it a few times with dp3 not that stable on these

Speedofix
14th March, 2015, 06:46 PM
So dealer update with star online and it will be okey ?

smartymarti
14th March, 2015, 06:47 PM
Yes they will reprogram and everything will return to normal , try to find a specialist that has it rathe rthan the main dealers

paulocallaghan
17th March, 2015, 10:23 AM
Main dealer or autologic will work fine. I've had a few go wrong , same as tou

Speedofix
17th March, 2015, 10:46 AM
Yes costumer have been to dealer and they update manualy the cgw and car working again.