fiat doblo 2011 ecu connect with FVDI possible?

[psx1]

try to change km in ecu, marelli 6F3 1.3 JTD engine fiat doblo 2011 with FVDI and does not connect me to Aug evil possible?
well me odometer changes, but the ECU by OBD try to connect but fails have to disconnect any cable or connector only some ping?
need help from expert lagun because of fiat understand little

[psx1]

try to change km in ECU Marelli 6F3 Fiat Doblo 1.3 JTD engine 2011 with VFDI possible?
my Abritus can be selected but not read me, the ECU by OBD for to flash power or clone or just change to normal obd cable that brings the machine I can not connect.
And my doubts and question is if I just connect 2 wire or 3 with a jumper or something similar so does the module is CAN.
But and I read somewhere that modules that connect kkl have to swap cables
copy what and found:
Green Adaptor Lead (MultiECUScan / FiatECUScan Adaptor 1) = Engine, ABS, Power Steering
Network Adaptor Lead (MultiECUScan / FiatECUScan Adaptor 2) = Airbag
Yellow Adaptor Lead (MultiECUScan / FiatECUScan Adaptor 3) = CAN
Purple Adaptor Lead (MultiECUScan / FiatECUScan Adaptor 4) = Electric Hood
Pin Configurations:
Green Adaptor Lead = Female to male pin 7 pins 1,7,9,12.
Network Adaptor Lead = Female male pin 7 to pin 3
Yellow = Female Adaptor Lead male pin 6 to pin 1 / Female 14 pin to 9 pin male / male Female pin 7 to pin 12
Purple Female Adaptor Lead = male pins to pin 7 7,8,11,1
that's why some doubt if someone who knows the subject can help me?
but no need to disconnect any cables or connector just some of ping?
you need the help of experts from some expert or fiat FVDI

[madbg]

It is old thread, but how you chance km in ECU?
I have same problem but with Fiat 500.

[javyb]

It is old thread, but how you chance km in ECU?
I have same problem but with Fiat 500.
Remove ecu program direct. Cannot do obd

[madbg]

I will.But what program i must use to change bin?NYO?