MC68HC08AZ32 Security Bits

[kostelectronics]

Hi all. I Try to read a Motorola MC68HC08AZ32 in a 1999 Volvo V70 Instrument Cluster with XPROG (Not XPROG-M). What values for Security-Bits must i set in XProg-Desktop? Can anybody help me?

[kostelectronics]

no help? :(

[PremierD]

What is the Mask Number...?

[kostelectronics]

1H56A from a Volvo Instrument Cluster. Type is: ZC443002CPU

[sixpack]

try: $BE-$07-$BD-$57-$BD-$57-$BD-$54

[kostelectronics]

Thanks sixpack, but don't work! does 1H56A a security option?? hmmmmm, i tryed soooo long now, over 20h and still not work, if anybody can help me, i'm sooo happy!!

[boorawchick]

$FF-$DD-$FD-$E0-$FD-$E3-$FD-$E6
$E0-$A6-$B1-$24-$B1-$24-$E0-$A6
$BE-$07-$BD-$57-$BD-$57-$BD-$54
$9F-$A4-$F6-$E0-$F6-$E0-$F6-$E0
$F1-$6A-$FA-$04-$E4-$DA-$FA-$04
$F9-$F1-$F9-$F4-$F9-$F7-$F9-$FA
$9F-$9C-$F6-$98-$F6-$98-$F6-$98

Try.

[kostelectronics]

Thank you! but i can't read it.....i think i must buy a ETL interface! :( i'm a studend and have not much money.

[boorawchick]

Thank you! but i can't read it.....i think i must buy a ETL interface! :( i'm a studend and have not much money.
If you're working with auto electronics you'll need it anyway.

[PremierD]

Thank you! but i can't read it.....i think i must buy a ETL interface! :( i'm a studend and have not much money...

They are the Original ..and the best programmers...Although a bit pricey... they do work ..I have all off them...

Another great little (but perfecty formed ) programmer is the UPA/USB from Elrasoft ...covers a load of MCU's and eeproms
Very easy to use...GOOGLE it...

[blacklisted]

..

They are the Original ..and the best programmers...Although a bit pricey... they do work ..I have all off them...

Another great little (but perfecty formed ) programmer is the UPA/USB from Elrasoft ...covers a load of MCU's and eeproms
Very easy to use...GOOGLE it...


@premired

you got the link wher you got yours from

and do you have the UPA from elrasoft ? is it good ? does it do in circuit

[PremierD]

http://www.etlweb.net/

Yep..have the UPA ..and Yes it does most of them in circuit...

ELRASOFT Products (http://www.elrasoft.com/)

[doxa]

Hi all. I Try to read a Motorola MC68HC08AZ32 in a 1999 Volvo V70 Instrument Cluster with XPROG (Not XPROG-M). What values for Security-Bits must i set in XProg-Desktop? Can anybody help me?
Try Upa serial, if not you must purchase HC 908 ETL wich
direct un lock sequrity sequence.XPROG no chance!

[doxa]

Try Upa serial, if not you must purchase HC 908 ETL wich
direct un lock sequrity sequence.XPROG no chance!
PS;Your Motorolla in dash is locked!Heed Frend,no more read
with XPROG!!!!!!!

[doxa]

PS;Your Motorolla in dash is locked!Heed Frend,no more read
with XPROG!!!!!!!
Back dash in car contact ignition and see is ti OK?
Volvo dash is problematic!!I hope understand this.

[siautomotor]

hi,i need your helps
i try to read 908 az32a OJ66D OF INMOBOX OF MERCEDES SPRINTER ,for start error delete with mercedes 1,3 ,but ,cant for security sequence
i have a x prog and upa serial
need this sequence!
thanks for alls

omar grosjean to
www.siautomotor.com.ar (http://www.siautomotor.com.ar)

[PremierD]

Xprog by all accounts will not read it... and If locked (which it is ) UPA will have difficulty... ETL's 908 programmer is the best option .. (auomaticly finds security sequence)

[siautomotor]

Xprog by all accounts will not read it... and If locked (which it is ) UPA will have difficulty... ETL's 908 programmer is the best option .. (auomaticly finds security sequence)
Thanks to alls
i can read with my new 908 etl 0J66D !!!!
try for other masks
omar grosjean
to siautomotor

[z786]

Xprog by all accounts will not read it... and If locked (which it is ) UPA will have difficulty... ETL's 908 programmer is the best option .. (auomaticly finds security sequence)
what bout x-prog m?

[twodks1chk]

hi all... I have been using a programmer from AR Labs. It does everything you need in the way of automotive. It uses adapters for the various chips. The owner provides great tech support. I don't know if it unlocks the 68hc08 (we don't do the 08 series chips hardly any cars here in the U.S. use them) but they do provide an adapter for it & there is documentation on the web site about it. They have great prices too

EPROM PROGRAMMER DEVICE PROGRAMMER BY ANDROMEDA RESEARCH (http://www.arlabs.com)

[PremierD]

AR Labs Looks as if It will do a lot off eeprom stuff... But not a lot of MCU's...In europe most of the Automotive industry Use MCU's... Also eprom eeprom and tssop's.. If you want to Read A 908 ..912 9s12...ect ...then the bset and safest option is to plump for ETL's (original) programmers ...the downside is they aint cheap...but if you count the cost of replacing ... a Gubbed Cluster ..Not that expensive in the long run...

[sixpack]

AR Labs Looks as if It will do a lot off eeprom stuff... But not a lot of MCU's...In europe most of the Automotive industry Use MCU's... Also eprom eeprom and tssop's.. If you want to Read A 908 ..912 9s12...ect ...then the bset and safest option is to plump for ETL's (original) programmers ...the downside is they aint cheap...but if you count the cost of replacing ... a Gubbed Cluster ..Not that expensive in the long run...
i see on ETL web page that there a no prices, where to buy the ETL programmers

[PremierD]

i see on ETL web page that there a no prices, where to buy the ETL programmers


http://www.etlweb.net/?ref=contact...

If you E-Mail them ..They will send you a price list mate....

[adam28]

Are there any in circuit progammers that can deal with security bits? I have upa, but i know they are no good for this. And also im thinking of getting ETL. Which of there separate programmers would i need to cover all security mcu's Cheers

[siti]

Are there any in circuit progammers that can deal with security bits? I have upa, but i know they are no good for this. And also im thinking of getting ETL. Which of there separate programmers would i need to cover all security mcu's Cheers
solution for hc05b6

[PremierD]

Are there any in circuit progammers that can deal with security bits? I have upa, but i know they are no good for this. And also im thinking of getting ETL. Which of there separate programmers would i need to cover all security mcu's Cheers

You would get by with the 908az60..And the 9s12 ..there are hc05/hc11..and of course NEC... it depends how deep you want to go mate...

[z786]

@PremierD so does the etl 9s12 cover secured MCU? also will it do in-circuit??

thanx

[pnave]

hello everybody....

[f1.f1]

Alternative progammers
http://www.cnc-lab.com/ommtrk.htm

[Hagelin]

f1.f1 do you know what motorola micros the omega can by pass security on and is it any good ?

Cheers

[valli]

Xprog by all accounts will not read it... and If locked (which it is ) UPA will have difficulty... ETL's 908 programmer is the best option .. (auomaticly finds security sequence)

Nobody try with XPROG-M ?

[etronic2]

Well,

I do have a clone of ver 4.5 and altough there is a SS displayed but there is no way to change it to what you want ( it shows FFFFFFFF-FFFFFFFF).
It's a shame really. Even if you know the bytes you still can do anything... Unless there is a way to put the SS in for a reading eeprom.....

[deffc0n]

I have new ETL programmer send me PM :)

http://www.autodiag.pl/galerie/p/programator-ukladow-mc68_131_m.jpg


MC68HC908AZ60 (2J74Y)
MC68HC908AZ60 (4J74Y)
MC68HC908AZ60A (3K85K)
MC68HC908AS60 (3J74Y)
MC68HC908AS60A (1L87J)
MC68HC908AB32 (3K56G)
MC68HC08AZ60 (1J35D)
MC68HC08AZ32 (0J66D)
MC68HC08AZ32 (1H56A)
MC68HC08AS20 (0H94K)
MC68HC08AZ32A (1L52H)
MC68HC08AB16A (0L72A)
MC68HC05H12 (0H57A)

[prusony]

Hi, need password ( SS ) to MCU MC68HC908AB32 (0L07H)
It`s xenon module from Tuareg.
10-x

[BeianM]

Here is a quick reference for 68hc range of processors. Has pinouts & mask set.
=> pinouts & mask set
(http://www.boss-tech.com/mask.htm)