View Full Version : Audi Q7 cruise control problem
klemenm2
18th March, 2015, 09:28 PM
Hello!
Does someone know wiring for retofitting tempomat in audi q7 2006.
i installed everything, coded with vcds now i get code 005481, witch points to incomplete wiring.
tempomat works in all positions by measuring blocks.
http://tapatalk.imageshack.com/v2/15/03/18/4be4dc041c9ac83e12af0c0581aba609.jpg
thanks for responses.,
Sent from my iPhone using Tapatalk
mbi
18th March, 2015, 10:24 PM
Probably You have to add one wire between engine ecu and steering column ecu.
What's engine code?
klemenm2
18th March, 2015, 10:56 PM
Its a 3.0 tdi engine code BUG
Sent from my iPhone using Tapatalk
mbi
18th March, 2015, 11:18 PM
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=305170&stc=1
Do you have this wire (gr/ge) between engine ecu and steering column ecu?
klemenm2
18th March, 2015, 11:46 PM
Will check tommorow,
I dont have pin 5 inside connector on sterring column ecu
Sent from my iPhone using Tapatalk
mbi
19th March, 2015, 12:04 AM
I dont have pin 5 inside connector on sterring column ecu
I think connector should looks like this:
http://www.audi-portal.com/en/diagnostic/ecu_12558.html
klemenm2
19th March, 2015, 12:06 AM
Connector is same, i dont have wire on pin 5
Sent from my iPhone using Tapatalk
klemenm2
19th March, 2015, 04:48 PM
Thanks mbi, your wiring is correct!
Connected blue connector pin 3 to steering ecu pin 5.
Sent from my iPhone using Tapatalk
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.