Ford Explorer 2003

[FxShaw]

Ford explorer 2003 has 118.216miles on it, I need it to be 93,000 miles please.

[ds33]

This one will be ok 90000mil

Just report if all ok :stung:

[FxShaw]

Thanks...will do

[FxShaw]

Was soo close...guy was in a hurry and pick it up before I got to test it. thanks anyways

[ds33]

No problem but it,s ok it,s about 90000km :chuncky:

[FxShaw]

KM? or miles?

[ds33]

Here is the 2 files original and changed in mil ...I think it,s OK http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=305662&stc=1 http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=305661&stc=1

[ds33]

If something wrong !! I can fix it and change !!

[FxShaw]

Ok so Guy came back :-D, he said 89,000 showed up..TY guy!

[ds33]

Nice to see that i helped :)

[Jp4ubaby]

Anybody has pinout? To do it with digiprog or TU


Sent from my iPhone using Tapatalk

[jomberykaso]

Anybody has pinout? To do it with digiprog or TU


Sent from my iPhone using Tapatalk


Hi mate, here is pinout for any programmer.

373142

Good Luck!

[neospeedo]

Also, in 2003 there are about 4 to 5 different Ford Explorer boards with 912D60, DC128, 912B32 with or without message center. Then you have Explorer Sports Trac.

[Jp4ubaby]

Thanks neo. I think color code is different to do with digiprog. What cable?


Sent from my iPhone using Tapatalk

[clusters]

Digi cables:

ST48

Yellow BKGD
Brown Ground
Green RESET
White +5V


ST51

Yellow BKGD
Brown Ground
Green RESET
White +12V

[Jp4ubaby]

Still have problem reading from digiprog 3 clone v4.94 saying plug 51. I think i got color code incorrect. I need help guys i need to do asap thanks in advance. I have TU 2008 if that helps. http://uploads.tapatalk-cdn.com/20160509/710a0dc71776b3e94c9f1cc796dbb68f.jpg

http://uploads.tapatalk-cdn.com/20160509/acc4f5650699db256a16cb897ee179a9.jpg


Sent from my iPhone using Tapatalk

[clusters]

Then you need to rewire your Digi cables with the proper colors. I just added correct colors to the ends according to DB25 pinout.

[Jp4ubaby]

Thanks m8. Ill try opening the cable adapter st51 see if wired correctly.

Does this color code looks good
St51
Red = red/5v
Brown = black/ground
Orange = white or yellow /bkgd
Black = green /reset



Sent from my iPhone using Tapatalk

[clusters]

:dontknow: You will have to check with a meter to the appropriate pins.

[SKYTON]

hi every one
please try this file
remaque there is difference name mcu motorola
MC68HC912DC128 BUT I FOUND ONLY MC68HC912DG128.
OTHER THING file must swaped ?try

[Jp4ubaby]

I checked adapter seems pinout are correct. Keep getting 'error ini' error on digiprog.


Sent from my iPhone using Tapatalk

[eliaselias]

today i have try with digiprog3 4.94 the dash was mcu motorola 68hc912dc128. i ust st48... its read ok but digiprog calculate wrong mileage i have press x button it have hive me another moleage but they are wrong ...
after i have enter eeprom to do it manually... in eeprom file the mileage was calculated ok ... when i write the byte... the write complete ok but when i read it again old value re-back again .... so dont waist your time with digprog3 ..enigma will do the job

[Jp4ubaby]

Hey guys got another version ford expendition 2006. Some help please. Has 93c46 prom but reading 1million somthing milea. 390789390790


Sent from my iPhone using Tapatalk

[skilion290]

Ford with 93c46 hmm never met anything like that all the same post dump and let's see what we can do about it


Sent from my iPhone using Tapatalk

[neospeedo]

These have an easy denso algo just like many toyotas. Take the chip off if you have problems reading. You will notice the denso logo on the dial face :chuncky:

390807

[Jp4ubaby]

Same here mate never seen one till now. Does anyone have the pinout for this model. I think hc12


Sent from my iPhone using Tapatalk

[jomberykaso]

I checked adapter seems pinout are correct. Keep getting 'error ini' error on digiprog.


Sent from my iPhone using Tapatalk

Look the picture:
390813

[Jp4ubaby]

I know is denso 93c46. But which option do you choose on the TU or digiprog. I dont see any car with option to read a 93c46. Anyone know?


Sent from my iPhone using Tapatalk

[jomberykaso]

I know is denso 93c46. But which option do you choose on the TU or digiprog. I dont see any car with option to read a 93c46. Anyone know?


Sent from my iPhone using Tapatalk

Ok mate, pay attention please:

* Use Digiprog.
* Connect your Digiprog to the power supply.
390820

* Then press ok:
390824


* Put the password (1) and press ok:
390825


* Select Eeprom option:
390826

* Then select "93"
390827

* Select the ?SET TYPE? and choose ?93C46″ (do not select "93c46 x 8")

* Then your digiprog has been set up to read a 93C46 chip. Press ?EEPROM? again and then ?READ?

* There will show you the information on the digiprog III screen when the reading is complete. Now press ?VERIFY? so the information on your screen can agree with the Eeprom.
Next click the ?FILE? and there will show you another sub-menu, you can click ?SAVE? and enter a file name for the information you are saving. Once you entered the file name, your data is safe and the vehicle is now ready to be reprogrammed manually.

Good Luck!

[Jp4ubaby]

Thanks jombary very big help. Now how to reprogram manually with option. How to write to eprom manually.


Sent from my iPhone using Tapatalk

[jomberykaso]

take it a picture to the digiprog screen to see what you read it

[jomberykaso]

mate to finish your problem...... do the following:

1? Turn on your Digiprog.
2? Select CAR/TRUCK
3? Select TOYOTA
4? Select YARIS
5? Select C46

Then follow the instructions from Digiprog..... very easy mate....really easy ......

[jomberykaso]

Same location and calculation than Ford Explorer 93c46, you will not have problem

[Jp4ubaby]

So i can choose any car option and eprom as long as its same 93xxx wont damage or corrupt?


Sent from my iPhone using Tapatalk

[jomberykaso]

So i can choose any car option and eprom as long as its same 93xxx wont damage or corrupt?


Sent from my iPhone using Tapatalk

Here is your answer mate:

390931

[Jp4ubaby]

Thanks omce again but i dont how to use hex codes or tachosoft. I only know how to use the programmer. Also i found that none of my programmer are not doing denso eprom dont know why. I think denso need to short out with clip or pin so that TU can read the 93c46.


Sent from my iPhone using Tapatalk

[jomberykaso]

mate just read eeprom 93c46 con digiprog and select toyota yaris c46, it will give you the correct mileage.

What is the problem mate?

[Jp4ubaby]

Im pretty sure ur correct mate but for some reason my machine stopped reading denso 93c46w3. I believe i have to bridge ocssilator but not sure anyone knows about this.

Sent from my iPhone using Tapatalk

[jomberykaso]

what machine are you talking about?

[Jp4ubaby]

Digiprog clone v4.94. For reason i cant read or write on it.


Sent from my iPhone using Tapatalk

[Jp4ubaby]

I figured it out i change power cable. Change to 3 volts. Thanks guys.


Sent from my iPhone using Tapatalk

[Felipevargas04]

old 240688
new 156012 por favor

read:

[frankrayk]

old 240688
new 156012 por favor

read:

Here for you testing and reporting.