PDA

View Full Version : Nissan Navara D40 Dash MCU dead


BALI7605
26th March, 2015, 11:00 AM
Hello,

I have a big trouble with a D40 dash, it is the new type as you can see on the photo. We read the dash with digimaster in the fist place but tahcosoft couldn't recognize the right mileage so i tried Orange5 on it. It has read the chip but the data looked dibrish and ever since the dash is dead,

Any suggestions??? i have upa, xprog smok orange5 etc
wiseman
26th March, 2015, 12:16 PM
Buy new MCU and program flash and eprom. You MCU is likely toast
vageric
26th March, 2015, 02:05 PM
try write Original data back in cluster
if not work try write back with good data
zckariya70
26th March, 2015, 02:14 PM
WRITE BACK UR ORI DATA WITH UPA USB PROGRAMMER IT WILL WORK OTHER WISE IF U HAVE ANY OTHER DATA WRITE IT AND CHANGE THE KM
BALI7605
26th March, 2015, 09:26 PM
how can i connect upa? and what mcu do i need to select? coz it does not list 9s12xhz512
BALI7605
26th March, 2015, 09:27 PM
thx for all the advises
zckariya70
27th March, 2015, 06:49 AM
u can c the mcu number easily ther it is 9S12XHZ512 select and read the mcu
unu
27th March, 2015, 07:49 AM
how can i connect upa? and what mcu do i need to select? coz it does not list 9s12xhz512

seems to be very simple to manage it ... But don't know why did yo u complicate ...
unu
27th March, 2015, 08:10 AM
please see here :
http://www.digital-kaos.co.uk/forums/showthread.php/466153-Nissan-navara-2011-9s12-points?highlight=navara+2011