coder5
10th April, 2015, 09:14 PM
Hello all.
Can someone please advise me if it is possible to adapt a used
ecu to this van without taking it to an opel garage.I was advised
that I will need tis on line to do the job.The eeprom from faulty ecu
is corrupted I tried it in the good ecu van starts ok but there is no metering
valve control with the result the rail pressure is very high and activating
pressure release valve at the end of rail.I can read eeprom and flash by bdm
I dont have tech 2 but have vaux com.
Thanks
Larry.
Can someone please advise me if it is possible to adapt a used
ecu to this van without taking it to an opel garage.I was advised
that I will need tis on line to do the job.The eeprom from faulty ecu
is corrupted I tried it in the good ecu van starts ok but there is no metering
valve control with the result the rail pressure is very high and activating
pressure release valve at the end of rail.I can read eeprom and flash by bdm
I dont have tech 2 but have vaux com.
Thanks
Larry.