PDA

View Full Version : galletto v54 eu



ocvirk
11th April, 2015, 05:19 PM
i wish write internal flash vw edc 17c46 with galletto v54 eu but i have messages otp sector not writeble.somebody have any solution or need any other tools.thank you

gttuning
11th April, 2015, 05:28 PM
r you tryin to write different flash or its ori from that ecu?

blade66
11th April, 2015, 05:39 PM
@ocvirk only over BootMode you can write ....

with FG V54 EU 100% work this ECU !

ocvirk
11th April, 2015, 05:40 PM
yes it is different.

blade66
11th April, 2015, 05:42 PM
yes it is different.

diffrent SW you can not WRITE :)))

ocvirk
11th April, 2015, 05:42 PM
yes .i have bootmode.

gttuning
11th April, 2015, 05:45 PM
messages otp sector not writeble.
OTP- one time programing- if you want to over write with different data it will not work.

ocvirk
11th April, 2015, 05:50 PM
ok somebody have all read vw golf 2.0tdi 103kw 03L 906 018AN SW 1039S41729 EDC17C46 YEAR 2010.I READ WITH GALLETTO AND I WRITE ALL BACK NO GLOW PLUG LIGHT AND ENGINE LIGHT AND FAN STARTS.NO ECU COMUNICATIONS.THANK YOU

tunertool
11th April, 2015, 09:24 PM
Writing back oriignal should be ok. What year is the car?

ocvirk
11th April, 2015, 10:16 PM
car is 2010.

Dobermann
11th April, 2015, 11:29 PM
i did a lot of these ecus edc17c46 year 2010 and 2011

With eu v54 work 100%

kospoz
11th April, 2015, 11:59 PM
If you can not communicate then somehow you damage the ecu.I had same issue in the past.Check these points

tunertool
12th April, 2015, 10:04 AM
Yes check your soldering ECU should be ok with ori file... get original file working and then I can help you make new ecu work...