VAG EDC MED9.5.10 death after flahing

[tiguan]

I need help for
VW Golf5 2005
1.6 **I
MED9.5.10


I was busy with flashing this EDC MED9.5.10 with MPPS and my laptop is switched off automatically flashing is not complete
car will not start and cooling fan On


how can i fix this
I've tried with MPPS slow recovery version on the table does not work
also with GallettoV54 tried not successful


has anyone idea
to make this flash to life

[Vasily.U]

I think only BDM...

[tiguan]

Ok Thanks, bdm with galletto or what?you also pin out for ECU bdm

[Vasily.U]

Use any bdm, pinout standard bosch.
You need ori full bdm file or read via bdm not complete flash and join with mpps file.

[pulsar2000]

now your in the hole , take your time make sure you use proper bosch pins, and make sure you connect correct procedure, right way round, easy to do more damage if not, fgtech or bdm100 follow guide on pins to the letter, hope you get it going ok

[chli1976]

You can try also with VAS-PC over selfdiagnostic. Go to a good dealer and he should can do this, but maybe he must modify something inn VASPC.

BDM is also possible, but you need a workling full BDM file