2010 HUMMER H3

[ngakson2002]

Hello Mate,

Please need help from anyone knowledgeable in GMC, Vehicles.In fact i have here a 2010 Hummer H3 with all key losts.Using Effi i have programmed a MEGAMOS ID48 from the dump attached and result is as followed

1) Starter motor does not crank the engine
2) with the immo box connected or not, the Security light which here is the PADLOCK lights and remain solid

Please from the above information, what could be the problem with this car i have checked soldering and others and everything is OK


Best Regards

[simon77]

hi
are you sure the car has a chip in the key from what i can remember i done a remote start on a 2008 h3 there was no chip in the key . i used relays and resistors to emulate the the magnetic pick up built into the ignition barrel.
can you post pictures of immo box you found. did you change ignition barrel!

[simon77]

http://newrockies.com/passlock-bypass/
check this out the vehicle has paaslock system on it it can be bypassed with module.

[ngakson2002]

hi
are you sure the car has a chip in the key from what i can remember i done a remote start on a 2008 h3 there was no chip in the key . i used relays and resistors to emulate the the magnetic pick up built into the ignition barrel.
can you post pictures of immo box you found. did you change ignition barrel!

Hello Mate,
Thanks for your reply.
1) All items found on this car indicates that t he key was provided with transponder
2) I have not change the ignition Barrel
3) Immobox is exactly as the one on the picture Module software 137 of tmpro2 here:http://tmpro2.com/index.php/modulesdescription1
4)I contacted NewRockies sometimes ago and they told me that their kit will work only if the Car has a valid working transponder key


Kind Regards

[simon77]

ok then this car definitely has transponder not the same as the 1 i have done. so the pass-lock bypass will not help at all. cant realy help you much more on this are there any fault codes have you checked live data !
regards