gaxi
16th April, 2015, 05:08 AM
Hello I try to read a bmsk 8 bosch ecu with BDM100 from china to generate keys for it, but after many many many hours with no success I decide to send it to a company in the Uk, after 2 days I got this email:
We have been working on the BMW ecu you sent us. We previously asked if someone had tried to programmed the ECU , We have tried for 4 hours to extract the data from the ecu. And this is not possible. A further test shows the flash file has been erased. This happens when the incorrect equipment is used to read the ecu or if the bike has had a short circuit. On first inspection, one solder pad on the programing solder points had been moved and was not stuck to the circuit board, which could only happen if the solder pad has been touched previously. This ecu cannot be programmed, the access has been erased . We see this often, when people use so called cheap BMW programmers. I am sorry to say this ecu cannot be repair.
Anybody has any idea or suggestion how can I fix it.?
Thanks in advance.
We have been working on the BMW ecu you sent us. We previously asked if someone had tried to programmed the ECU , We have tried for 4 hours to extract the data from the ecu. And this is not possible. A further test shows the flash file has been erased. This happens when the incorrect equipment is used to read the ecu or if the bike has had a short circuit. On first inspection, one solder pad on the programing solder points had been moved and was not stuck to the circuit board, which could only happen if the solder pad has been touched previously. This ecu cannot be programmed, the access has been erased . We see this often, when people use so called cheap BMW programmers. I am sorry to say this ecu cannot be repair.
Anybody has any idea or suggestion how can I fix it.?
Thanks in advance.