eurovox max red 2007 modle

[pingg20]

hi can someone help me with 2007 red eurovox max i have downloaded the eurovox red ufl connect to pc via nulmodem power up eurovox do i need a ip address or anything im not sure how to go about this flashing process on eurovox can do dreambox ok any advice how to flash eurovox would be appriciated

[smirnoff_rules]

no m8 just click download and it does it all automatically . u connect it with a null cable ?

[pingg20]

hi smirnoff rules thanks for the reply tried that download went ok powered on with cable connection went for an auto scan says imediatly no transponders found i noticed that all the channel frequancy symbol rate grids are all blank i must have went wrong somewhere?

[smirnoff_rules]

u have got the cable feed in the top left looking at the back m8 the rfr and not aerial one ?

[pingg20]

hi smirnoff rules thanks for the reply tried that download went ok powered on with cable connection went for an auto scan says imediatly no transponders found i noticed that all the channel frequancy symbol rate grids are all blank i must have went wrong somewhere?

<--pingg20 added 26 Minutes and 26 Seconds later...-->

sure cable connected to top left rf in same one i was watching with today i put in keys manualy and all was ok was trying to do a fix without having do put keys manualy i think where im going wrong i havent put in channel details where it says upload down load edit at the bottom theres nothing in the window to download there

[smirnoff_rules]

have u tried both frequency's on the new scan ? 6945 and the other ?

[pingg20]

thers no frequencys showing i know im in 6952 thers also nothing showing in channel boxes either i seem to have no channel info downloaded fro firmware i noticed the bar at bottom is stuck at 8%

[smirnoff_rules]

ok . press menu>installation>user installation and then 0000 for the code then press power scan .. wot does it say in that box



could be a bad flash ? it was this one u installed Digital Kaos - Downloads - eurovox max blue and red.21.04.08.fix (http://www.digital-kaos.co.uk/forums/downloads.php?do=file&id=196)

[pingg20]

no it was the one i downloaded from big maq site ufl 2.10 version i went back to factory settings and trying an auto scan started to pick up channels not sure if it will have the updates i was looking for for my mate thanks for the help so far after this i think i will stick to dreambox""" ps after the scan on factory reset all channels working ok when i went into the key section to check all are empty new to me might be helpfull to pass on if you like may help others thanks for all the help you are a good man

[smirnoff_rules]

ufl is for the max v box not yours m8

u must of download the right one if its working now

[dnwatts]

Are there any new images for the eurovox?

[satsmo]

Latest for the Max V is Kuro 3 18/04/08 and for Max V with 8% signal problem 28/04/08.

Red, (2007), and Blue, (2006), models have the latest revision date of 21/04/08.