PDA

View Full Version : Update Kess v2 via the serial port.



gnomzhenya
22nd April, 2015, 09:40 PM
The people here I wrote manuals, how to flash Kess through the serial port without disassembly Kess. Only manual in Russian, there is no time to translate. I think the pictures, you can understand! Use it!
This is not an upgrade to version 4, just an alternative to JTAG. Without disassembling Kess v2
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=310557&stc=1

simaservis1108
22nd April, 2015, 09:59 PM
I could translate if members want.

gnomzhenya
22nd April, 2015, 10:18 PM
Thank you very much! I can translate into Google :)

ominimicu
23rd April, 2015, 10:14 AM
warning thats a bootloader method not Jtag. its used to erase only and specially for CRP2

morgano
24th April, 2015, 09:36 AM
Yes, if MCU is secured by CRP3 no way to enter BSL by this method.

betrescudan
24th April, 2015, 10:43 AM
The people here I wrote manuals, how to flash Kess through the serial port without disassembly Kess. Only manual in Russian, there is no time to translate. I think the pictures, you can understand! Use it!
This is not an upgrade to version 4, just an alternative to JTAG. Without disassembling Kess v2
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=310557&stc=1
explain something mate...did you tested this,or you have posted for the others for testing and reports that broken tools?
what sense have to post this?
explain better...maybe ecutuners will understand where he don"t protected well his files....:devil:
or maybe will give you cfg file and fw file...and maybe updates folder...pfff

gnomzhenya
24th April, 2015, 02:06 PM
It's an easy way to fill in the LPC2478 firmware through the UART !!! This is my version! All tested and working.

8.23.motor
2nd May, 2015, 08:37 PM
already tried does not work with new fw: Pungeva:

Catalin_TCM
2nd May, 2015, 09:38 PM
Please can someone to help us with good solution to unlock if we have CRP3 ?

betrescudan
2nd May, 2015, 10:09 PM
no solutions mate...change nxp

Overtune
3rd May, 2015, 10:32 PM
It could be possible to gain access if you could use the secondary ISP bootloader...

betrescudan
3rd May, 2015, 11:10 PM
no solutions yet
http://www.lpcware.com/search/gss/lpc2478

H.Wessel
8th May, 2015, 05:52 PM
edited edited

svvag2000
8th May, 2015, 06:56 PM
Krasava!!!
He flashed his device on your instructions.

svvag2000
8th May, 2015, 07:09 PM
Rebiatuni, ...reset and key-1-boot power, and firmware back.

H.Wessel
9th May, 2015, 12:51 AM
hi

so what I understand for svvag2000 doc from the prototype board: http://starterkit.ru/html/index.php?name=shop&op=view&id=5
the pin 110 on NXP key_1_boot must be ground while reset the mcu, this will cause the NXP enter in bootloader mode

then just select lowest baudrate on flashmagic (9600) and connect lpt
remember usb/com cable must be "cross", that means Rx from cable to Tx on Kess, TX from cable to Rx on Kess, and ground to ground

this shoud bypass the CRP3 protection and allow reflash firmware, or am I missing something? :)

best regards
H.W

ovi730
10th May, 2015, 04:49 PM
not working . i have treied until i ~~~~ed my nxp pins again. no way

morgano
10th May, 2015, 04:51 PM
That is normal way to enter bsl mode on lpc2478, not works on crp3 enabled mcu.


Regards,

mbtun
10th May, 2015, 07:33 PM
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=312977&stc=1
Try this one :)

andkl2810
10th May, 2015, 08:03 PM
Hi guys ! Not yet tested !!
:)

BR!

betrescudan
10th May, 2015, 09:07 PM
Hi guys ! Not yet tested !!
:)

BR!
not working...

mbtun
11th May, 2015, 04:35 AM
try my version with crp3 :)
the other one is working just fine if there is no crp

svvag2000
11th May, 2015, 06:39 AM
Please can someone to help us with good solution to unlock if we have CRP3 ?

...who told you that you have a protection CRP3?
Itself think, ...files from the folder "UPDATE" are uploaded several times, the processor has protection CRPx, but not CRP3!
... I have no suitable debugger at present, what to realize idea
It is necessary to keep somehow the Reset and P2.10 levels in zero before inclusion of power supply of the controler and then to erase flash.


... who saw the counter, try it
https://yadi.sk/d/PtjFfl2WgZNGe (https://yadi.sk/d/VzRZ-_NbgYxcR)
pass:SysAdmin


https://yadi.sk/d/4jhBkef1gZ2uj

Overtune
17th May, 2015, 02:28 PM
Hi, When i select the fw and try to flash it , i get this error.
It is flash magic related.
Any way to fix this?
Thankshttp://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=313890&stc=1

Overtune
17th May, 2015, 02:30 PM
Please don't bother mention the wrong NXP selected. THe picture is just to show you the error i get when i try to open a hex fw for my kess v2.
Thank you

betrescudan
18th May, 2015, 10:43 PM
you need hex file for this...not bin file...mate

mbtun
19th May, 2015, 12:02 PM
bin to hex or hex to bin can be done by most hex editors

Overtune
25th May, 2015, 12:05 PM
Fw 4.036 that is updated with Jlink is 504Kbyte.
Now, chinese market that sends ulink together with Kess v2, for 3.099fw sends 1,37Mbyte hex.
Where can we find 1,37Mbyte hex for 4.036 fw?

ecutuners
25th May, 2015, 02:02 PM
You won't find it on any forum that's for sure, only 3.099 dump..

mbtun
25th May, 2015, 02:15 PM
You won't find it on any forum YET that's for sure, only 3.099 dump..

ecutuners
25th May, 2015, 03:05 PM
You won't find it on any forum YET that's for sure, only 3.099 dump..



If you understood these tools more you would know 4.036 dump will never exist because after 4.024 the fw is locked to the NXP internal ID number and cannot work in another mcu. Only way to get to 4.036 is by ksuite. So good luck searching for your 4.036 dump you will need it.

cawadany
25th May, 2015, 03:23 PM
So the tool with ulink can't to be updated to 4.036?

OVERSPEED
25th May, 2015, 03:54 PM
Just to make it public, my Kess start saying it had only 8 before lock, try with this metod and didn?t work... make it with Jlink and it?s all ok again

ecutuners
25th May, 2015, 04:13 PM
So the tool with ulink can't to be updated to 4.036?
Yes can be updated by Ksuite

cp2010
25th May, 2015, 04:31 PM
If you understood these tools more you would know 4.036 dump will never exist because after 4.024 the fw is locked to the NXP internal ID number and cannot work in another mcu. Only way to get to 4.036 is by ksuite. So good luck searching for your 4.036 dump you will need it.

i have hex 4.036 working on every LPC chip
problem not ID only method in reading out file
extracted file in china not working !

teamtuner
25th May, 2015, 04:52 PM
so guys,I readed about button reset
how is working this?
is something like reseting bios from computer?
something shortcut and reset ram?

javyb
25th May, 2015, 07:44 PM
Does anyone have fw 3.099 for china clone

Chippy0815
26th May, 2015, 10:47 PM
Does anyone have fw 3.099 for china clone315220
here you are...

javyb
26th May, 2015, 11:06 PM
315220
here you are...
Am I right in saying when my tokens run out I flash this by jtag and will start to work again?

Chippy0815
26th May, 2015, 11:22 PM
Am I right in saying when my tokens run out I flash this by jtag and will start to work again?
yes, this is correct.

Zohar
23rd June, 2015, 07:45 PM
Link is dead. Plz reupload it.


BR



...who told you that you have a protection CRP3?
Itself think, ...files from the folder "UPDATE" are uploaded several times, the processor has protection CRPx, but not CRP3!
... I have no suitable debugger at present, what to realize idea
It is necessary to keep somehow the Reset and P2.10 levels in zero before inclusion of power supply of the controler and then to erase flash.


... who saw the counter, try it
https://yadi.sk/d/PtjFfl2WgZNGe (https://yadi.sk/d/VzRZ-_NbgYxcR)
pass:SysAdmin


https://yadi.sk/d/4jhBkef1gZ2uj

BubbaFet
24th June, 2015, 11:34 AM
If you understood these tools more you would know 4.036 dump will never exist because after 4.024 the fw is locked to the NXP internal ID number and cannot work in another mcu.

So we can update to 4.024 with jTag, and it will still work?

Where can I find the 4.024 fw?

teamtuner
25th June, 2015, 12:29 AM
try here...

KNS1
1st October, 2015, 04:49 AM
try here...
Where????where?

skywoker
1st October, 2015, 05:33 AM
Where????where?

Here mate !

teamtuner
1st October, 2015, 06:46 AM
and sdcard and also the hex file for next reset?

OVERSPEED
1st October, 2015, 01:41 PM
With 4.024 the process to renew tokens with Jlink is the same ? Do I have to change SD files to make it work ?

teamtuner
1st October, 2015, 02:12 PM
4.024 is crp2 protected...for renew tokens need to know how unlock nxp...:)

OVERSPEED
1st October, 2015, 03:15 PM
So, the best option is Keep old 3.99 FW and Ksuite 2.06

teamtuner
1st October, 2015, 06:13 PM
yes...and work only old cars...:)

teerak2uk
1st October, 2015, 06:53 PM
So, the best option is Keep old 3.99 FW and Ksuite 2.06
4.024 and reset tokens via ttl

teamtuner
1st October, 2015, 07:28 PM
4.024 and reset tokens via ttl
is it free reset mate?....

teerak2uk
1st October, 2015, 07:55 PM
is it free reset mate?....
If you know how to do it yes

teamtuner
1st October, 2015, 08:09 PM
If you know how to do it yes
can you share how to do?....

teamtuner
1st October, 2015, 08:10 PM
If you know how to do it yes
can u share how to do it?...for free?

teerak2uk
1st October, 2015, 08:13 PM
Sorry not mine to share but search and you will find

skywoker
1st October, 2015, 09:19 PM
Here! This is the way..333855

teamtuner
1st October, 2015, 09:49 PM
i don"t ask for me mates...i know how...i ask for the others members...and i am curiouse if you will share this infos for free...like " bannedforgotedusername" who shared many times many things on this forum...

KNS1
2nd October, 2015, 03:12 AM
https://yadi.sk/d/Hx5DdK_UjTbNU. kess reprog with serial port

KNS1
2nd October, 2015, 03:15 AM
where to find the files on the sd 4.024???

teamtuner
2nd October, 2015, 09:46 AM
https://yadi.sk/d/Hx5DdK_UjTbNU. kess reprog with serial port
ok...3.099 hex file...isp uart (is not bad the method...but too long and need also brain.exe )....we talk about crp2 4.024

skywoker
3rd October, 2015, 11:25 AM
i don"t ask for me mates...i know how...i ask for the others members...and i am curiouse if you will share this infos for free...like " bannedforgotedusername" who shared many times many things on this forum...

IF I SHARE...

If i share, many businesses i will ruin, but.. I keep thinking... why do not you do this?

teamtuner
3rd October, 2015, 02:20 PM
IF I SHARE...

If i share, many businesses i will ruin, but.. I keep thinking... why do not you do this?
because i like mistery yet...and maybe i have not what to share...yet

EduardNN
1st December, 2015, 07:20 PM
Yes, if MCU is secured by CRP3 no way to enter BSL by this method.
And if you carefully search the forum, the example here described as reset CRP3 ... (http://www.digital-kaos.co.uk/forums/showthread.php/497268-KESS2-K-TAG-lpc2478-UNLOCK?highlight=kess2)

rickymix34
11th May, 2016, 04:42 PM
374946


her hex + diagram connection ulink

microsoftik
13th June, 2016, 06:08 PM
Rebiatuni, ...reset and key-1-boot power, and firmware back.
TNX man! it works!

mexanico1971
13th June, 2016, 10:05 PM
TNX man! it works!

If works ; push thank"s

joenobody
9th August, 2016, 01:52 AM
Awesome! Exactly what I need!

Moldovan1
9th April, 2017, 12:21 PM
Work on CRP3 also? So pin 35 reset and pin 110 key_1_boot both to GND und after that power connect? Thanks

BWF
3rd June, 2017, 09:58 PM
After this, is it possible to read the NXP?

csw03
5th June, 2017, 05:06 PM
Programming in isp mode working only with CRP2 level, if you write 4.036 no, you can't read, you can read only in CRP0 ( fw 3.099 )
You can connect in DB25 port too for flash, not need solder

BWF
5th June, 2017, 07:10 PM
Is there any way to read a 5.017 kess?

Enviado desde mi Redmi 3 mediante Tapatalk

csw03
5th June, 2017, 09:42 PM
No, is in crp3

Dolcevita
7th September, 2017, 09:44 AM
can some share drivers and soft for u link lost all my stuf :(

nici
7th September, 2017, 11:02 AM
Bins for Kess V3.099 V4.036 and Ktag V6.070

and

SD CARD for Kess v3 and V4.

SD Unlock for V4.036
https://mega.nz/#!QAJQXRgQ!Nuw2RJDzqO12Ag320NCC6G87SjbSweeI6c--c2dnnPI

SD Unlock for V3.099
https://mega.nz/#!dVpx1DAY!Lo60dWQcmZk6WU1nLNLBu2-B8-rjpL_TQKQxskkRgVg


Enjoy



Pass free via PM or SKYPE - nici.com2


Best redgards !

nici
7th September, 2017, 11:47 AM
Where is my post ??

Dolcevita
7th September, 2017, 11:56 AM
Just need ULINK drivers and magicflash :D

TheDevil667
2nd January, 2018, 07:46 PM
hi can i have the Pass pls

otich81
15th May, 2018, 04:13 AM
Saludos amigo.
no puedo descargar el enlace de Ktag firm 6.070 OK.rar (http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=472519&d=1504778215) (220.8 KB, 80 vistas)

Matttes
27th December, 2018, 07:49 PM
Hello,
have plase anybody LPC fw and sd card sw for kess 5.017?
Many many thanks
Matias

miralem
30th December, 2018, 04:05 PM
SD card we have it, and all about CID is known but LPC FW would be very nice , but as i know it is not available for free, and even CRP3 is not problem right now

if someone has it, please mail it...

bergbahn
1st January, 2019, 12:06 PM
I have SD card files 5.017 and can encrypt them for any SD card with any CID.
All you have to do is insert a blank SD card into the Kess, connect it, start Ksuite and then read out the SD Card with WinHex, zip it and send it to me.

But I'm looking for the 5.017 and 5.028 NXP

galiza
10th January, 2019, 04:10 PM
SD card we have it, and all about CID is known but LPC FW would be very nice , but as i know it is not available for free, and even CRP3 is not problem right now

if someone has it, please mail it...

CRP3 is not problem?????
How?
Where?
The hot air method and shortcutting no always works, sometimes yes, sometimes no (i test it on several kess).

tintin2005
26th March, 2023, 01:10 AM
Bins for Kess V3.099 V4.036 and Ktag V6.070

and

SD CARD for Kess v3 and V4.





SD Unlock for V4.036
https://mega.nz/#!QAJQXRgQ!Nuw2RJDzqO12Ag320NCC6G87SjbSweeI6c--c2dnnPI

SD Unlock for V3.099
https://mega.nz/#!dVpx1DAY!Lo60dWQcmZk6WU1nLNLBu2-B8-rjpL_TQKQxskkRgVg


Enjoy



Pass free via PM or SKYPE - nici.com2


Best redgards !


Hello.

can you send password. please?

thanks